X12A DIGITAL WIRELESS INTERCOM
Table of Contents I Contents I Caution ---------------------------------------------02 Certificate -------------------------------------------03 Introduction Product Image ---------------------------------- 04 Function ----------------------------------------Power Current Setting Display ----------------------Volume Setting ------------------------------User Number Setting ------------------------Channel Setting ------------------------------Pairing(Grouping) ---------------------------------------------
Caution X12A operates in the license-free 900MHz ISM band. X12A subject to the Rules and Regulations of the FCC. This device complies with part 15 of the FCC rules. Operation is subject to th e following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interferenc e that may cause undesired operation.
Caution * Do not put sharp, hard materials into the connector hole when using this product. * Do not put apart or repair X12A yourself. * Do not leave X12A in a vehicle in hot or cold weather. * Leaving X12A in a closed area for a long period of time may result in deformation or malfunction of this product. * For charging use only the provided charger & cable. Using a third party charger may cause explosion, fire or malfunction. * Stop using X12A immediately if you smell something like smoke from this.
Introduction Product Image LEFT PTT button DISPLAY /Battery charging level Channel Up Volume Up Channel Down Volume Down Power Charging port Mute RIGHT -04-
Function 1. Power Power on, off with PWR button 2 sec 2. Current Setting Display 1 Connection/ Stand-by 4 Battery 2 USER Number 3 Channel Number 1. Connection/Stand-By : Twelve bars on the upper display shows connection stand-by . 2. User Number : it shows the user number that your device is set to. 3. Channel : means the current channel number that your device is set to. If you are a master device, is displayed. 4. Battery : It indicates current battery level.
Function 3. Volume Setting Volume level ranges from 0 to 8. Note Volume 0 means no audio volume 4. User Number Setting User Number ranges from User 1 to User 12. Each device takes one user number, and user number for devices should be different from one another. STEP 1 STEP 2 Press&hold button to go to Menu and then choose “8. User”. Choose between “User 1” and “User 12” Press PTT button to select Press PTT button to complete Note ● There should be one Master Device for group communication.
Function 5. Channel Setting Devices should be set to same channel number for communication. If there are multiple communication groups in the same channel nearby, set channel number different from other groups to avoid potential interference.
Function 6. Pairing (Grouping) Below pairing procedure should be done to establish communication group. STEP 1 Pairing is made between a master device and rest devices. Each device needs to be set to a different user number than others STEP 2 Press&hold ‘M’ button to go to Menu and then select “7. Pairing”. Push PTT button to select STEP 3 Once pairing is done, paired devices go to stand-by display.
Function 7. Noise Cancel You can minimize surrounding noise with this function. STEP 1 STEP 2 Press&hold Cancel ” button to go to menu and then select“ 1. Noise Push PTT button to select Choose between “0” and “8” Noise Cancel is off at 0. Push PTT button to select 8. Beep Sound You can turn on or off warning sound and button sound depending on user’s preference. STEP 1 Press&hold STEP 2 Choose between “Enable” and “Disable” button to go to menu and select “ 5. Beep Sound ”.
Function 9. Display Brightness Setting You can adjust display brightness level. STEP 1 STEP 2 Press&hold button to go to menu and then select “ 3. Brightness . Choose between “0” and “8”. Push PTT button to select Push PTT button to select 10. Mic Level You can adjust the Microphone Volume level. With this function your voice transmission is clearer if you set it right, depending on your voice level. STEP 1 Press&hold Level ” button to go to menu and then select “ 4.
Function 11. Side Tone You can turn on or off Side Tone function. If you turn on the Side Tone, you can hear what you are saying at real time. STEP 1 Press&hold button to go to menu and then select “ 5.Side Tone Push PTT button to select 12. Rotation The menu window returns to the first without stopping at the end number. STEP 1 Press&hold button to go to menu and then select “ 6.Rotation Push PTT button to select 13.
Function 14. PA Mode (PTT Button) User 1-12 can use PA mode by using below PTT button When it selected “PA Channel”. It can be broadcast during the “Talk Time” time set by the PC Program and rebroadcast after the “Suspend Time” has elapsed. If you set “Alert Time”, an alert will occur before the broadcast time expires. Talk Time: Time to broadcast on PA channel (10~40s) Alert Time: Warning alarm time before end of broadcast (disable,1~20s).
Function 16. How to reset in case of malfunction + + Press these buttons together at the same time. Then the device goes off. Note Be careful not to press these buttons together during normal operation. 17. How to charge When charging, orange color is displayed and the green light turns on when the device is fully charged. Note Please use only the provided charging adapter or use 5V / 2A adapter or higher than that.
FAQ Following is the list of frequent questions and answer. 1 I can’t communicate with other devices. - Check if your device is paired with Master Device. - In your group, check if Master Device exists. 2 I cannot join a group communication. - Check if other users are connected on the display. - Check if there is a Master Device in the group. - You might be too far from Master Device to get the signal from it. . 3 I cannot turn on the device.
Specification & Caution Frequency 902MHz~928MHz Transmission Distance 1Km (Line of Sight) Battery Lifetime 17Hour Battery Rechargeable Li-ion 3.7V Battery Transmission Output 23 dBm ± 1 dB Weight 445g Size Width(w) : 177mm Height(h) : 220mm Thickness(t) : 84.3mm Working Temperature -10/+50℃ Modulation System FSK Transmission Method TDMA ※ The function may change without notice for product improvement purpose.
