Assembly Instruction

bond small desk

assembly instructions

Page 1 of 47088032 - 09-05-08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect ﬁ nish.

! Proper assembly of this item requires 2 people.

cam bolt 4x cam lock 4x

Hardware

wood dowel 8x

spring washer 12x

ﬂ at washer 12x

long bolt 12x

short “L” bracket 2x

long “L” bracket 2x

short bolt 12x

PAGE 1
bond small desk assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
bond small desk assembly instructions 1. Flip the desk top over onto a clean smooth surface. Pull the drawers out until they stop.
PAGE 3
bond small desk assembly instructions 2. Insert can bolts (A) and wood dowels (C) into leg assemblies as shown. Insert cam locks into rails as shown in the drawing, making sure to line up the indicator mark points toward the end of the rail. Next align the leg assemblies to the side of the side of the desk and attach using long bolt (D), spring washer (E), and flat washer (F). Tighten with allen key. A B NOTE: The top rail has 2 more holes than the bottom rail.
PAGE 4
bond small desk assembly instructions 3. Place the short “L” brackets and long “L” brackets into the locatioins shown in the drawing. Insert short bolt (I) into each hole and tighten with supplied allen key. be sure not to overtighten. With the help of another person flip the desk upright. Asjustable levelers are installed in the legs to accomodate uneven flooring. To adjust these levelers simply turn then couterclockwise to raise the leg. G I I H CARE INSTRUCTIONS Hardware may loosen overtime.