Assembly Instruction

2x2 console

assembly instructions

Page 1 of 402.19.10

! Tools supplied:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.

! Proper assembly of this item requires 2 people.

m6 x 45mm short bolts 20x

lock washer 28x

Hardware

flat washer 28x

m6 x 57mm long bolt 8x

wooden dowel 10mm x 40mm 8x

PAGE 1
2x2 console assembly instructions ! Tools supplied: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people. Hardware A B lock washer 28x m6 x 45mm short bolts 20x C D flat washer 28x m6 x 57mm long bolt 8x E wooden dowel 10mm x 40mm 8x 02.19.
PAGE 2
x2 console assembly instructions desktop 1x 02.19.
PAGE 3
2x2 console assembly instructions 1. Connect 2 corner legs and 2 inner legs to each center shelf by inserting short bolt (A), lock washer(B), and flat washer(C). Make sure the 2 corner legs are on the same side of the shelf as shown. C B A 2. insert wooden dowels(E) into the pre-drilled holes located on the bottom shelf. Align and connect the assembled legs and shelf from step 1 to the wooden dowels in the bottom shelf. Insert bolt(D), lock washer(B), and flat washer(C) thru bottom into legs.
PAGE 4
2x2 console assembly instructions 3. Place the desktop upside down on a clean, soft surface. Align the 2 leg assemblies with the top as shown. Insert bolt(A), lock washer(B), and Flat Washer(C) thru top blocks into legs. Tighten with attached hex key. C B A A B C CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners. 02.19.