Weret Watch W1 User Manual v1.
Changes 4 Overview 5 Box Contents 6 Setting Up Your Weret Watch 7 Activate your watch 7 Download and install the Weret app 7 Turn Bluetooth on and follow the app instructions 7 Putting on your Weret Watch 7 Getting to know your Weret Watch 8 Watch Controls 8 Watch Dial 9 Time and Weather Modes 9 Time Mode Weather Mode Weather Themes 9 10 10 Using Weret App 12 App interface 12 Customize Pusher for a Function 13 Select a Data Theme 13 When Battery Runs Low 13 Charge your We
USA: Federal Communications Commission (FCC) statement 19 Canada: Industry Canada (IC) statement 19 Waste Electrical and Electronic Equipment, WEEE 20 European Union (EU) - EC Declaration of Conformity 20
Changes Version Released by Change summary 1.0 2019-06-05 Aliya Dabai Document created 1.
Overview The Weret watch is an analog smartwatch that adapts to your lifestyle by streaming relevant live data directly to your wrist. Choose a data theme on the smartphone app that includes, for example, the weather conditions at a specific location or the swell height at your favorite surf beach.
Box Contents Weret Watch Charging Pad Watch Strap Quick Start Guide USB Cable
Setting Up Your Weret Watch Activate your watch The watch arrives in “shipping mode” and is inactive. It is activated by placing it on top of the accompanying Weret induction charger, letting it sit a few seconds and then taking it off the charger. When the watch is removed from the charger it exits shipping mode, and the second hand will start moving. If the battery level is below 25%, it will charge up to 25% before exiting shipping mode.
Getting to know your Weret Watch Watch Controls The watch is controlled using three pushers: top pusher P1, crown pusher P2 and bottom pusher P3. Do not rotate either of the pushers, it provides no functionality and rotating P2 (the crown) could lead to damage of the watch. Pressing P1 or P3 sends a command to the smartphone app. This command activates a user selected function.
Watch Dial Outer scale Left side: air pressure, 930 mBar to 1050 mBar Right side: temperature, -20°C to 40°C Left sub-dial 0-12, linear Right sub-dial North/West/South/East compass Accent Waveform Note: All watch models are available in an Imperial version with Fahrenheit and inches of Mercury (inHg) or a Celsius version with mbar. Time and Weather Modes After exiting shipping mode the watch can either be in Time mode or Weathermode. Pressing P2 toggles the watch between these two modes.
Weather Mode Hour minute and second hand shows the latest fetched data of the currently selected weather theme. The hands will use the outer scales and accent form to show numeric values. What scale and hand combination that the user should look at is communicated through information in the app and depends on the data theme selected. Left and right sub dial shows the latest fetched data of the currently selected weather theme.
Hour hand The hour hand points at the outer scale, showing your selected location's current air temperature. Minute hand The minute hand points at the outer scale, showing your selected location's current water temperature. Second hand The second hand shows the current tide type. Left of center indicated flood current, the 12 position indicates high tide, and right of center indicates ebb current.
Using Weret App App interface A The “My Watch” tab is what is currently shown in the app screenshot. It is the main screen of the app and it shows the latest data of the currently selected data theme. B The “Themes” tab shows a listing of currently available Data Themes that the user can pick from. C The “Store” tab takes the user to the Weret online e-commerce store where watches and accessories can be purchased.
D The Time/Data toggle indicates if the watch is in Time mode or Data mode. Can also be pressed to switch the watch between Time and Data mode. E Shows the configuration for the currently selected data theme. E.g. the location on a weather theme. F The watch matches the watch edition paired with the smartphone app. It mirrors the hand position on the actual watch and whos the data points in detail. G/I Allows the user to configure the actions of the P1 and P3 pusher buttons.
normal, the hand for the seconds is placed at noon and stopped ticking. <5% capacity The watch moves all hands to noon and disables everything except the internal calendar function. The user must charge the watch. <20% AND in shipping mode Normally, all hands point up (12) when in shipping mode. When power is below 20% and in shipping mode, the hands point down (6).
Blue and flashing Charging error, the connected power source is not able to provide enough power Specification Weret Watch W1 (42 mm) ● ● ● ● ● ● ● 316L stainless steel case Sapphire crystal glass Swiss Soprod chronograph movement Watch diameter: 48 mm diameter (1.9 in). Watch thickness: 14.5 mm (0.6 in). Weight: ~ 89 g case without straps (3.
Compatible Devices ● ● ● ● iPhone 4s and higher iPod Touch 5th Gen and higher iPad 3rd Gen and higher BLE (Bluetooth Low Energy) compatible Android device Compatible OS ● ● iOS 8.0 and higher Android 6.
place the watch on devices with a magnetic field such as microwaves, refrigerators, speakers, etc. If the battery in your watch is completely discharged, there is a risk of leakage and that may damage the movement. Your watch is only compatible with the provided charger. You should avoid exposing your watch to extreme temperatures of above 50°C/131°F or below -5°C/23°F. Also, avoid sudden changes in temperature, for example in a sauna or when diving into cold water after direct exposure to the sun.
• Weret will not repair damaged leather products. We will only replace them if the conditions of the warranty are met within 6 months from date of purchase. This warranty is void if the leather product has been damaged by accident, negligence, unauthorized service or other factors not due to defects in materials or if a valid receipt is not included. • Any work done by an unauthorized third party.
electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.