MULTI-PURPOSE PLANER STAND For replacement parts visit Model # 6588, 6588T bit.ly/wenvideo WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS 2 3 4 4 5 6 8 9 11 Product Specifications Introduction General Safety Rules Specific Rules for the Planer Stand Know Your Planer Stand Assembly Operation Exploded View and Parts List Warranty PRODUCT SPECIFICATIONS Model Number: Stand Height: Tabletop Capacity: Tabletop Dimensions: Shelf Capacity: Shelf Dimensions: Weight: 2 6588, 6588T 29.3 in. 220 lbs 23.8 x 20.8 in. 55 lbs 23.7 x 14.5 in. 50.
INTRODUCTION Thanks for purchasing a WEN Planer Stand. We know you are excited to mount your favorite planer onto the stand and roll it around your workshop, but first, please take a moment to read through this manual. It contains important information regarding the safe operation and assembly of this product. Please keep this manual available to all users during the entire life of the planer stand.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and serious injury. To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood.
KNOW YOUR PLANER STAND Make sure all the following parts are accounted for before discarding the packaging. If any part is missing or broken, contact our customer service at 1-800-232-1195. 1 2 3 4 5 6 7 8 11 9 10 COMPONENTS 1. Tabletop 2. Shelf 3. Base Assembly 4. Leg 5. Shelf Bracket 6. Pedal Assembly 7. Carriage Bolt x1 x1 x1 x4 x2 x1 x32 8. M8-1.25X60 Bolt x2 9. M8 Washer x34 10. M8-1.25 Hex Nut x34 11. (For mounting power tool to the stand) M8-1.
ASSEMBLY STEP 1: INSTALL THE LEGS ONTO THE TABLE TOP 1. Place the table top on the floor, install one leg to a corner of the table top using four carriage bolts, M8 washers and M8-1.25 hex nuts. Repeat with all four legs. Finger tighten the bolts to leave room for adjustments when attaching the base. Tabletop x 1 Carriage Bolts x 16 M8 Washers x 16 M8-1.25 Hex Nuts x 16 STEP 2: INSTALL THE BASE 2. Attach the table top and leg assembly to the base.
ASSEMBLY STEP 3: INSTALL THE PEDAL ASSEMBLY 3. Attach the pedal assembly to the base using two M81.25X60 hex bolts, M8 washers and M8-1.25 hex nuts. The wheel should be positioned inside the base assembly. Pedal Assembly x 1 M8-1.25X60 Bolts x 2 M8 Washers x 2 M8-1.25 Hex Nuts x 2 STEP 4: INSTALL THE SHELF 4. Attach the two support brackets onto the legs with four carriage bolts, M8 washers and M8-1.25 hex nuts. Install the shelf onto the support brackets using four carriage bolts, M8 washers and M8-1.
ASSEMBLY STEP 5: ATTACH THE POWER TOOL Operating Direction 5. Now is the moment you’ve been waiting for. Unplug and bring over your favorite power tool. Make sure the weight does not exceed the stand capacity and the tool is wider than it is tall. Place the power tool on the center of the tabletop to maximize stability. Orient it so you will be operating the tool on the side perpendicular to the direction of the stand’s travel. Mount the power tool onto the stand using four M81.
EXPLODED VIEW AND PARTS LIST No 1 2 Part Number 6588-001 6588-002 Description Tabletop Leg Qty 1 4 3 4 6588-003 6588-004 Shelf Shelf Bracket 1 2 5 6 6588-005 6588-006 Base Assembly Pivot Wheel Bracket 1 1 7 8 6588-007 6588-008 Foot Pedal Shaft 1 1 9 10 11 6588-009 6588-010 6588-011 Spacer Foot Pedal Shaft 2 2 1 12 13 6588-012 6588-013 M12 Washer Pivot Wheel 4 1 14 6588-014 Retaining Ring 2 15 16 6588-015 6588-016 M8-1.25X100 Bolt M8-1.
EXPLODED VIEW AND PARTS LIST 10
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
THANKS FOR REMEMBERING