Product Manual

MODEL 3424EX

WOOD LATHE

BED EXTENSION

INSTALLING THE BED EXTENSION

1. Remove the two pan head screws (Fig. 1 - 1) and the end plate (Fig. 1 - 2) from the lathe. Set these

parts aside.

2. Attach the two included feet to the bed extension (Fig. 2 - 3).

3. Fix the bed extension to the lathe using the two 8-1.25x20 socket head screws (Fig. 2 - 2) and 8 mm

lock washers (Fig. 2 - 1). Use the included hex wrench to tighten the screws.

3. Place the end plate (Fig. 3 - 1) on the end of the bed extension and fix it with the two pan head screws

(Fig. 3 - 2).

Model Number 3424EX

Compatible with

WEN 12x18-inch wood lathes,

model numbers 3424 & 34018

Length of Extension 23.5 in.

Length of Lathe with Extension 41.5 in.

Dimensions 24.5 x 8 x 8 in.

Weight 23.15 lbs

SPECIFICATIONS

Fig. 1 Fig. 2 Fig. 3

PAGE 1
MODEL 3424EX WOOD LATHE BED EXTENSION SPECIFICATIONS Model Number 3424EX Compatible with WEN 12 x 18-inch wood lathes, model numbers 3424 & 34018 Length of Extension 23.5 in. Length of Lathe with Extension 41.5 in. Dimensions 24.5 x 8 x 8 in. Weight 23.15 lbs INSTALLING THE BED EXTENSION 1. Remove the two pan head screws (Fig. 1 - 1) and the end plate (Fig. 1 - 2) from the lathe. Set these parts aside. 2. Attach the two included feet to the bed extension (Fig. 2 - 3). 3.
PAGE 2
MOUNTING THE LATHE TO A BENCHTOP For effective and safe operation, the lathe should be mounted to a benchtop or table. To do this, remove the feet and use the four threaded holes in its base, as well as the two threaded holes on the extension’s base, to bolt it to the surface. The threads are M8-1.25. Place the machine on a stable, flat work surface. Make sure there is sufficient open space around the machine for operation and adjustments.