Installation Manual

ManualsBrandsWeMo ManualsDimmers, Switches & OutletsMini Smart Plug

Setting up the Wemo® Mini Smart

Plug, F7C063

Body

The Wemo® Mini Smart Plug, F7C063, lets you turn electronic devices ON or OFF

from anywhere using your smartphone or tablet. This home automation device uses

your existing home Wi-Fi to provide wireless control of lamps, heaters, fans and more.

You can even set schedules for your devices and control them remotely using a mobile

internet connection.

Follow the instructions below to learn how to set up your Wemo Mini.

Step 1: Plug your Wemo Mini into a three-pronged grounded outlet.

NOTE: Wait for the Status light to blink orange and white. This

signifies that the Wemo Mini is now ready to be set up. To know more

about the Status light behaviors of your Wemo Mini, click here.

Step 2: Tap the Settings icon on your Android™ or iOS device.

Enable Wi-Fi and connect to your Wemo network. Each Wemo device

has a unique Wemo ID printed at the back of the unit.

Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...

1 of 7 10/30/2017 10:50 PM

Summary of content (13 pages)

PAGE 1
Knowledge Article 1 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... Setting up the Wemo® Mini Smart Plug, F7C063 Body The Wemo® Mini Smart Plug, F7C063, lets you turn electronic devices ON or OFF from anywhere using your smartphone or tablet. This home automation device uses your existing home Wi-Fi to provide wireless control of lamps, heaters, fans and more. You can even set schedules for your devices and control them remotely using a mobile internet connection.
PAGE 2
Knowledge Article 2 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... QUICK TIP: If you are unable to locate your Wemo Mini on the Wi-Fi list, you may need to restore your Wemo Mini to factory defaults. Step 3: Launch the App.
PAGE 3
Knowledge Article 3 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... Step 4: The Personalize screen will allow you to modify the name or image of your Wemo Mini. You can either make the changes at this point or just tap Next and make the changes later.
PAGE 4
Knowledge Article 4 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... Step 5: Enter a valid email address and tap NEXT.
PAGE 5
Knowledge Article 5 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... Step 6: Select your home Wi-Fi and enter your password.
PAGE 6
Knowledge Article 6 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... Wait while the Wemo App connects to your Wi-Fi. Once this is done, Remote Access will be enabled by default.
PAGE 7
Knowledge Article 7 of 7 http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the... The Wemo Mini is now successfully set up and you can see it on the Wemo App’s Devices list.
PAGE 8
Knowledge Article 1 of 2 http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall... How to manually reset the Wemo® Mini Smart Plug, F7C063 to factory defaults Body There are two scenarios where you will need to reset your Wemo® Mini Smart Plug, F7C063.
PAGE 9
Knowledge Article 2 of 2 http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall... NOTE: If the light is blinking orange, try restoring your Wemo Mini by using the instructions found in the Scenario 1 above. If the light alternately blinks orange and white, then it is ready for setup. Click here for instructions on how to set up your Wemo Mini.
PAGE 10
Knowledge Article 1 of 2 http://belkin.force.com/Articles/articles/en_US/FAQ/Understanding-the... Understanding the Wemo® Mini Smart Plug, F7C063 Status Lights Body Have you ever looked at your Wemo® Mini Smart Plug, F7C063, noticed a light on it and wondered what it means? The light you see is the Wemo status light. Depending upon its behavior you can tell what state your Wemo is in, and use this article to assist in troubleshooting any issues it is reporting.
PAGE 11
Knowledge Article 2 of 2 http://belkin.force.com/Articles/articles/en_US/FAQ/Understanding-the... Alternating Orange / White - When the Wemo is finished booting it, will begin to alternate blinking of orange and white. This means it is ready for setup. To learn about how you can set up the Wemo Mini, click here. OFF - When the light is off, it means everything is great with the Wemo and it is functioning normally but it is not turned on (power flowing through the front outlet).
PAGE 12
Knowledge Article 1 of 2 http://belkin.force.com/Articles/articles/en_US/Troubleshooting_and_Tut... How to resolve inconsistent, slow, or weak wireless connection Body Wireless technology is radio-based, which means connection performance decreases when the distance between devices increases.
PAGE 13
Knowledge Article 2 of 2 http://belkin.force.com/Articles/articles/en_US/Troubleshooting_and_Tut... To solve the problem, change the channel and SSID on your access point or router. Preferred channels to use are 1, 6, 9 and 11 since they're considered as non-overlapping channels. To learn how to change your network's wireless channel, click here. If you are not sure about the settings, it is best to leave it at its default settings. The channel is set to Auto by default.