Application Guide

ManualsBrandsWeMo ManualsDimmers, Switches & OutletsMini Smart Plug

The Wemo® Mini Smart Plug,

F7C063 now supports Apple®

HomeKit™ which means you can

now control your Wemo Mini using the Apple Home app. This article will guide you on connecting your Wemo

Mini to the Apple Home app.

Before you begin:

Your iOS device must be connected to the same Wi-Fi as your Wemo Mini to do the initial connection with

the Apple Home app.

Determine if you have 1st or 2nd gen Wemo Mini. Does your Wemo Mini have a HomeKit code sticker on

the back?

No - 1st gen

Yes - 2nd gen

How to connect a Wemo® Mini Smart Plug,

F7C063 with the Apple Home app

Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... https://www.belkin.com/us/support-article?articleNum=288072

1 of 11 25-Oct-18, 7:04 PM

Summary of content (11 pages)

PAGE 1
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 1 of 11 How to connect a Wemo® Mini Smart Plug, F7C063 with the Apple Home app https://www.belkin.com/us/support-article?articleNum=288072 The Wemo® Mini Smart Plug, F7C063 now supports Apple® HomeKit™ which means you can now control your Wemo Mini using the Apple Home app. This article will guide you on connecting your Wemo Mini to the Apple Home app.
PAGE 2
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 2 of 11 https://www.belkin.com/us/support-article?articleNum=288072 1st Gen 2nd Gen Do I need latest Yes, the Wemo App is required for Optional, if you will be using the Apple Home Wemo App? initial setup. app to manage your Wemo Mini. However, in order to receive firmware updates, the Wemo App is required.
PAGE 3
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 3 of 11 https://www.belkin.com/us/support-article?articleNum=288072 Connecting the Wemo Mini with the Apple Home app These steps apply to both 1st and 2nd gen Wemo Mini. Step 1: Launch the App. Step 2: Go to the More tab and select Connect to Apple Home App. Tap on Get Started. NOTE: If a pop-up message appears saying Wemo Would Llike to Access Your Home Data, select OK. Step 3: Tap on Get Started.
PAGE 4
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 4 of 11 https://www.belkin.com/us/support-article?articleNum=288072 NOTE: If you have a Wemo Bridge on the same Wi-Fi and your Wemo Mini was associated to it via the Apple Home app, the Wemo App will automatically detect the Wemo Bridge. You will have the option to disconnect the Wemo Mini from the Wemo Bridge and manage the Wemo Mini on its own using the Apple Home app by tapping on go here.
PAGE 5
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 5 of 11 https://www.belkin.com/us/support-article?articleNum=288072 Step 4: Tap the Connect button beside the Wemo Mini you want to connect to the Apple Home app then tap Continue.
PAGE 6
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 6 of 11 https://www.belkin.
PAGE 7
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 7 of 11 https://www.belkin.com/us/support-article?articleNum=288072 Step 5: You can retain the existing name of your Wemo Mini as what your Wemo App was using or you can change it by tapping on the device’s name. You can also change this at anytime later.
PAGE 8
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 8 of 11 https://www.belkin.com/us/support-article?articleNum=288072 Step 6: Tap Done. Your Wemo Mini will be listed under the Connected section. You have successfully connected your Wemo Mini to the Apple Home app.
PAGE 9
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 9 of 11 https://www.belkin.com/us/support-article?articleNum=288072 If you have more Wemo Mini to add, just go back to the Wemo App and tap Connect for the remaining Wemo Mini and repeat the steps. You can now manage your Wemo Mini with the Apple Home app. Adding an accessory using the Apple Home app These steps only apply for the 2nd gen Wemo Mini.
PAGE 10
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 10 of 11 https://www.belkin.com/us/support-article?articleNum=288072 also enter the code manually by tapping on the Don't Have a Code or Can't Scan? link. Do not unplug the Wemo Mini during this step as setup will fail. Step 4: You can personalize your newly-connected Wemo Mini's name, Room, Type, etc. When you're finished, tap Done.
PAGE 11
Belkin Official Support - How to connect a Wemo® Mini Smart Plug, F... 11 of 11 https://www.belkin.com/us/support-article?articleNum=288072 Your Wemo Mini is now connected to your Apple Home app. You can also open the Wemo App and it’s ready to use. Related Articles: Wemo® Mini Smart Plug, F7C063 with Apple HomeKit support troubleshooting tips(http://www.belkin.com /us/support-article?articleNum=283241) Wemo Mini Smart Plug, F7C063 with Apple® HomeKit™ support Frequently Asked Questions(http://www.