Item # : AF30BELMC Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 30/12/2019 (E) Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. V. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. The provided glue is to secure wood dowels in place .
Parts List 1 5 9 2 4 2 3 7 7 8 6 Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A Ø8x30mm Wooden dowel 12 pcs B Ø6x32mm Cam bolt 12 pcs C Ø15x9.
Step 1 B 3 B B B 3 B B B B Secure cam bolt (B) into part (3) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 x2 A B A B R Q 1 2 A B A B Insert wooden dowel (A) into part (2), secure cam bolt (B) into part (1) ,using screw (Q) attach stopper (R) to part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 F H G X W A F H A 7 G X x2 Insert wooden dowel (A) to part (7),then using bolt (F) with lock washer (H),flat washer (G)secure plate (X) to part (7) with hex key (W) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 4 2 3 C 1 2 C Using cam lock(C) secure part (2) to part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 5 2 3 C 1 2 C Using cam lock(C) secure part (2) to part (1) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 6 2 C 2 C 2 3 C C 3 Using cam lock(C) secure part (3) to part (2) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 7 2 3 D D X 7 C X C 3 X C C 7 H G W X E Using cam lock(C) secure part (7) to part (3) with Philips head screwdriver .and using bolt (E) with lock washer (H),flat washer (G) secure plate (X) to part (3) with hex key (W) as per diagram. Place sticker (D) cover the holes as per diagram finally. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 8 P P P P P 9 P P P P 2 5 1 P 2 3 Using screw(P) attach parts (5,9) to parts (1,2) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 9 2 J J J J 2 J 4 J Finished edge Insert shelf support pin (J) into part (2) as per diagram. Make sure you place the four shelf support pins (J) in the same level. So the shelf is not titled .Put part (4) into unit as per diagram. Tilt and rest the adjustable shelf(4) onto the shelf support pins . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 10 N M N M 8 N K K M M N L 6 K K L Using screw (N) attach Europe hinge (M) to parts (6,8) ，then using handle bolt (K) secure handle (L) to parts (6,8) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 11 8 2 2 6 N N M N N Using screw (N) attach Europe hinge (M) to part (2) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 12 1 U S 9 Using screw (S) attach Velcro strap (U) into part (9) to part (1) with Philips head screwdriver as per diagram. Open and close the doors .if necessary adjust the screws for a good fit . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 13 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall V T U Using screw (T) attach plastic strap (U) into nut (V) to wall with Philips head screwdriver as per diagram.
Step 14 Final Assembly Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
