Instructions / Assembly

ManualsBrandsWelwick Designs ManualsDesks52 in. L-Shaped Dark Walnut Computer Desks with Keyboard Tray

P.1

2019 b

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Revised 28/11/2019 (E)

Walker Edison

Item # : D52HARL

Assembly Instructions

Summary of content (26 pages)

PAGE 1
Item # : D52HARL Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 28/11/2019 (E) Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. V. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. The provided glue is to secure wood dowels in place .
PAGE 4
Hardware List A Ø8x30mm Wooden dowel 16 pcs B Ø6x35mm Cam bolt 8 pcs C Ø15x11mm Cam lock 8 pcs Sticker 8 pcs D E Ø6x50mm Screw 8 pcs F M4 Hex Key 1 pc G Ø1/4"x12mm Bolt 38 pcs H Ø1/4"x15mm Bolt 2 pcs J Ø1/4"x25mm Bolt 3 pcs K Bolt 3 pcs L Nut 2 pcs M Wrench 1 pc Bolt 3 pcs P Shelf support pin 12 pcs Q Plastic wedge 12 pcs Screw 12 pcs S Hole cover 1 pc T Glue tube 1 pc Screw 8 pcs Drawer slider 1 set N R U V Ø1/4"x45mm Ø3
PAGE 5
Step 1 U V U U V U 5 3 Using screw (U) attach drawer slider (V) to parts (3,5) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 8
1 Step 4 2 3 15 17 C 17 C C C C C 11 Using cam lock(C) secure parts (15,17) to part (11) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 9
Step 5 1 2 3 16 C C 11 Using cam lock(C) secure part (16) to part (11) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 11
Step 7 E F E E E E E E 18 E 16 17 17 15 Using screw (E) attach part (18) into parts (15,16,17) with hex key (F) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 12
Step 8 F 10 G G G 10 9 10 G G 18 10 10 10 F G F G Using bolt (G) attach parts (9,10) to part (18) with hex key (F) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 15
Step 11 P 17 17 P 15 P P P P P P 16 P 19 14 14 Finished edge P Insert shelf support pin (P) into parts (15,16,17) as per diagram. Make sure you place the four shelf support pins (P) in the same level. So the shelf is not titled .Put parts(14,19) into unit as per diagram. Tilt and rest the adjustable shelf onto the shelf support pins . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 17
Step 13 L M F 8 6 8 8 H G F 6 1 Using bolt (G) attach part (6) into part (1) with hex key (F) ,then using bolt (H) and Nut (L) attach part (8) into part (6) with wrench (M) and Hex Key (F) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 22
Step 18 U V 4 U U U U 4 Using screw (U) attach slider drawer bracket (V) into part (4) with Philips head screwdriver as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 25
Step 21 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the support leg to level the unit . Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.