Insert wooden dowel (A) into parts (12,13,14), then using cam bolt (C) secure parts (1,12,13,14) with Philips head screwdriver as per diagram.
Insert wooden dowel (A) into parts (3,4) as per diagram.
Using cam lock(B) secure part (12) to part (3) with Philips head screwdriver as per diagram.
Using cam lock(B) secure part (13) to part (4) with Philips head screwdriver as per diagram.
Using cam lock(B) secure part (13) to part (3) ,part (14) to part (4) with Philips head screwdriver as per diagram.
Put part (5) into parts (3,4,12,13,14) as per diagram.
Put parts (6,8) into pre-assembly frame as per diagram.
Using bolt (E) attach part (9) into parts (12,13,14) with hex key (F) as per diagram. Align the back panel slot .
Using bolt (H) attach part (10) into part (9) with hex key (F) ,then using bolt (G) attach part (11) to part (9) as per diagram.
Using bolt (H) attach part (10) into part (9) with hex key (F).
Put part (2) into parts (3,4,12,13,14) as per diagram.
Using cam lock(B) secure part (1) to parts (12,13,14) with Philips head screwdriver as per diagram.
Insert shelf support pin (J) into parts (12,13,14) as per diagram. Make sure you place the four shelf support pins (J) in the same level. So the shelf is not titled .
Put part (7) into unit as per diagram.
Place sticker (D) cover the holes as per diagram .
Using screw (K) secure plastic wedge (L) to parts (2,5,8) with Philips head screwdriver as per diagram.
Step 17 P 1 M P M Using screw (M) attach plastic strap (P) into part (1) with Philips head screwdriver as per diagram. Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Using screw (N) attach plastic strap (P) into nut (Q) to wall with Philips head screwdriver as per diagram.
If necessary, adjust the floor levelers to level the unit.