User's Manual

SIZE:130x185MM
1)Do not push objects into holes and ventilation slots.
Do not expose this product to moisture or place any objects l ed with liquids on or near
the product.
Do not place a naked ame sou ce, such as lighted candles, on or near this product.
Do not store or operate the device in environments where the temperature is above 50
degrees celsius or below -10 degrees celsius.
Do not intentionally hit the device or place heavy or sharp objects on the device.
Only use accessories specied by the manu acturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualied se vice agent to
perform adjustments or repairs.
10.1" Exterior Components
Package Contents
Please make sure all of the following are present when you unpack your
MEETING ROOM INTERACTIVE DIGITAL SIGNAGE
1
2
6
No.
No.
Function
Function
3
4
5
10
11
12
13
Serial port（RS232）
USB 2.0（3288）/ USB 3.0 （3399）
4G LTE ( Optional function )
SD Card
RJ45 with POE
Mic
Camera
7
8
VESA 75*75mm
9
3.5mm audio jack
DC in power supply port
Power button
Micro USB OTG
Recovery
Features
Copyright Information
All intellectual property rights in this publication are owned by and protected by
applicable copyright laws and international treaty provisions. retains all rights not
expressly granted. No part of this publication may be reproduced in any form
whatsoever or used to make any derivative work without prior written approval by .
Reserves the right to revise this publication, and/or make improvements or changes
in the product(s) and/or the program(s) described in this documentation at any time
without prior notice. The information in this document is provided in good faith, but
without any representation or warranty whatsoever, whether it is accurate,or complete
or otherwise, and on express understanding that shall have no liability whatsoever to
other parties in any way arising from or relating to the information or its use.
All other trademarks are the property of their respective owners. Other company and
brand products and service names are trademarks or registered trademarks of their
respective holders.
Important Notices
User manual Power adapter
1 2 3 4 5 6
MEETING ROOM INTERACTIVE DIGITAL SIGNAGE
User Manual
10.1”MEETING ROOM INTERACTIVE DIGITAL SIGNAGE
10.1"LCD panel resolution1280*800
Quad-core cortex A17,RK3288/Dual-core A72+quad-core A53,RK3399
RAM 2GB
Internal memory 16GB
Android 5.1/8.1（3288）/Android 7.1/9.0（3399）
10-Point capacitive touch
5.0M/P,front camera
WiFi 802.11b/g/n
RJ45 ethernet with POE
4G LTE ( Optional function )
SD card
USB 2.0 host
（3288）/ USB 3.0 host（3399）
USB for serial(RS232 format)
Micro USB OTG
POE IEEE802.3at,POE+,class 4， 25.5W
3.5mm earphone
LED Light bar，RGB
2*1.5W speaker
VESA: 75x75mm
Adapter:12V/1.5A
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed of at the end of its life separately from
your household waste. There are separate collection systems for recycling in your
country. For more information, please contact the local authority or your retailer
where you purchased the product.
Installation instructions for wall hanging
User Manual
10.1”MEETING ROOM INTERACTIVE DIGITAL SIGNAGE
5x
KA4.0*30mm
1x
KM4.0*8mm
5x
￠6*36mm With wall plug
1 2
3 4
5 6
1
2
3 5 7 9 11
12
13
4 6 8 10
259,36mm
178,36mm
11,5mm
217,4mm
136,4mm
256,65 [10,1]
20,98mm
20,98mm
129,68mmm
75mm
75mm
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interferenceto radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 2
0cm between the radiator and your body.