WDRV-5063M/7063M Owner's Record The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call your dealer regarding this product. MODEL: WDL-5001M WDRV-5041M WDRV-5043M WDRV-5061M WDRV-5063M WDL-7001M WDRV-7041M WDRV-7043M WDRV-7061M WDRV-7063M Serial Number: Warnings To reduce the risk of electric shock do not remove cover (or back). NO user serviceable parts inside.
WDRV-5063M/7063M Table of Contents 1. Table of Contents 3 2. Features/Precautions 4 3. Packing List / Installation 7 4. Functions Monitor Remote Control 8 9 5. System Wiring WDRV-5043M/7043M WDRV-5063M/7063M WDL-5001M/7001M WDRV-5041M/7041M WDRV-5061M/7061M 10 10 11 11 11 6. Operation 12 7. Troubleshooting 14 11. Specifications / Dimensions 16 Table of Contents.
WDRV-5063M/7063M Features ● WDRV-5063M/7063M is specifically designed as an automotive vision system. - High Resolution 5" / 7" TFT LCD Panel - Free Input Voltage (DC 12V~DC 32V) - NTSC/PAL Compatibility - 3 Camera Inputs - Automatic Picture Display (3 Triggering Functions) - Auto Scanning Function - Dimmer Fuction - Built-in Speaker - OSD (On Screen Display) - Weatherproof (IP54) - Easy Release Bracket Precautions ● Warning To prevent fire or shock hazard, do not expose the set to rain or moisture.
WDRV-5063M/7063M ● Do not remove the cover To reduce the risk of electric shock and maintain the quality of the product, please do not remove the cover. Please follow the instructions of the wiring diagram in the Installation Guide. ● Keep small articles out of the reach of children Store small articles (screws, etc.) in places not accessible to children. If swallowed, consult physician immediately.
WDRV-5063M/7063M ● Caution Do not attempt to modify this product in any way without written authorization. Unauthorized modification could void the user's authority to operate this product. ● Power This set operates on DC power. The voltage is as indicated on the label on the back cover. Never apply AC power to the set directly. Do not allow anything to rest upon or roll over the power cord, and do not place the set where the power cord is subject to damage.
WDRV-5063M/7063M Packing List Set [TFT-LCD Monitor] Manual Remote Controller (Option) Easy Release Bracket (Option) Stand Bracket (for WDL Series) Power and Video Input Cable Sunshield Stand Bracket (for WDRV Series) 2 Batteries (Type AAA) for Remote Controller (Option) Installation ● Install the monitor on a surface which can width stand more weight than 5Kg (11 lbs) - Clean the surface before installation - Remove the protective paper covering the bottom of the bracket - Stick the provided bra
WDRV-5063M/7063M Functions MONITOR 1 2 NO 1 2 3 3 4 5 MENU Protection Window SPEAKER IR 4 UP/DOWN 5 CAMERA/SCAN 6 7 VOLUME MENU 8 POWER/DIMMER 9 10 CONNECTOR BRACKET 8. Function 6 7 8 2 9 10 DESCRIPTION Non Reflection and protection of LCD. (Option) Sound out 0.5W X 2 Max. Remote control sensor. (Remote control is optional) Use select items in the on screen menu, press UP/DOWN buttons to control rear view motorized camera. Camera 2 only.
WDRV-5063M/7063M REMOTE CONTROL (Option) 1 2 3 4 5 RIGHT REAR LEFT 6 7 8 9 15 16 17 18 19 20 21 22 23 10 24 11 12 13 14 25 26 Battery "AAA" Size(1.
WDRV-5063M/7063M System Wiring [WDRV-5043M / 7043M] [WDRV-5063M / 7063M] Camera1 Camera2 Camera3 WDRV-5063M/7063M 4Pin Cable 6Pin Cable 4Pin Cable WDRV-5043M/7043M 4Pin Cable 4Pin Cable 4Pin Cable The shutter camera is optional. Bracket for fixing cable.
WDRV-5063M/7063M [WDL-5001M / 7001M] RCA Jack (FEMALE) Video Input (Yellow) Bracket for fixing cable. (Option) Power DC +12~32V GND Audio Input (White) [WDRV-5041M / 7041M] [WDRV-5061M / 7061M] WDRV-5041M/7041M 4 Pin Locking Cable WDRV-5061M/7061M 6 Pin Locking Cable The shutter camera is optional. Bracket for fixing cable. (Option) MALE (Camera Input) Trigger1 Power DC +12~32V GND [General Camera] WDRV-3478C Pin Connection [SIDE VIEW CAMERA] HOLE 1 4 2 3 A FEMALE Pin No.
WDRV-5063M/7063M Operation 1) Three view system: You can hear sound all the time. 2) On view or security camera system: Audio available only when vehicle is in reverse. ● MENU MENU M - Press to enter setup menu - Selectable OSD menu disappears within 5 seconds if there is no command given. - Menu Toggle Page1 (Function Settings) - Use Page2 (Camera Settings) buttons to navigate menu, Page3 (Monitor Settings) SELECT adjust menu settings. A. Press 'MENU' button on the remote controller.
WDRV-5063M/7063M B. Press 'MENU' button twice on the remote controller. The following will appear on the screen. MENU MIRROR SCALE SCAN-TIME [OFF] [0 sec] RIGHT [OFF] [OFF] [0 sec] REAR [OFF] [ ] [ ] [0 sec] OFF OFF LEFT ● ● ● MIRROR : Set mirror option for each video source SCALE : Ability to set scale for each video source SCAN-TIME : Ability to set the delaytime for scanning from 0 to 9 seconds C. Press 'MENU' button three times on the remote controller. The following will appear on the screen.
WDRV-5063M/7063M Troubleshooting Q: Screen is too bright. A: Adjust BRIGHTNESS or CONTRAST. When pressing RESET button, it will go back to default setting. SCREEN Q: Screen color is red or close to green. A: Adjust TINT in menu mode. Press preset to go back to default setting. Q: Colors are dim. A: Decrease the color by adjusting the button in menu mode. VIDEO Q: Screen is not clear. A: When the extension cable is too long diminishing of video may happen.
WDRV-5063M/7063M Q: Motorized camera does not operate. A: Check if motorized camera is connected with REAR. Check if source switches are in REAR mode. Q: Auto scan does not operate. A: Scan does not operate when there is only one camera image. Operation Error Q: Auto scan mode is too fast. A: Adjust S.TIME in appropriate level in menu mode. Q: OSD disappears in the screen. A: Set OSD [OFF] to [ON] in menu mode. Q: The screen does not change when entering trigger. A: Set INPUT [Auto] in menu mode.
WDRV-5063M/7063M Specifications 5 Inch Series(Option) TFT-LCD COLOR 5 Inch Series TYPE SCREEN SIZE BRIGHTNESS LCD VISUAL FIELD (ANGLE) CONTRAST MTBF INPUT SIGNAL FEATURE POWER CONSUMPTION SIZE(Width x Depth x Height) POWER SOURCE WORKING TEMPERATURE STORAGE 7 Inch Series COMPOSITE (75Ω) DC +12V ~ +32V Dimensions 5.9" 7.7" 4.9" 5.7" 1.3" 1.3" 1.3" [5 Inch Series] 1.3" [7 Inch Series] Made in Korea Patent pending. Design and specifications are subject to change without prior notice.