WDAC-4288WD
The camera delivers clear high quality pictures, even when backlit, by increasing exposure in dark areas while decreasing it in bright areas; a coreected image clear results. The video drive lens and the DC drive lens can be selected by the touch of a switch.
Overview Side View Bottom View Tripod Mounting Bracket Screw Hole Used to fix the camera onto a bracket or tripod.
Overview Installation Procedures Lens Rear View The lens is not supplied with this camera. Purchase a lens suitable for the environment. This camera accepts an auto iris lens, and both C-and CS-mount lenses. Note • It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera. • Keep the lens surface clean, as the picture quality suffers if there is dirt or fingerprints on the Lens. Using an Auto lris Lens 1.
Installation Procedures Using a C/CS mount lens 3. Remove the cover of the Auto IRIS Lens connector plug and solder the lens cable to the connector pins of the plug • For a Video Drive Lens Pin 1: Red (Power) Pin 2: NC Pin 3: White (Video Signal) Pin 4: Black (Ground) • For a DC Drive Lens Pin 1: Damping Pin 2: Damping + Pin 3: Drive + Pin 4: Drive - Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
AC24V / DC12V