3-10 Network Menu ³±° Îåô÷ïòë Íåîõ Network related setting such as TCP/IP. 1. From the System menu, select "3:Network". Select the item to setup. ˁ ÔÃЯÉÐ ˁ ÄÈÃÐ ˁ ÆÔÐ ˁ ÄÎÓ ˁ ÓÎÍÐ ³±°± ÔÃЯÉÐ Set an IP address and other details for TCP/IP communications. Automatic setup is possible when the DHCP function is enabled. 1. From the Network, select "1:TCP/IP". Current setting contents are displayed. Select the item to setup. 2. Input the address.
Chapter 3 System menu ˁÉÐ áääòåóó Set the IP address assigned by the network administrator. Set a unique IP address to each of the XIT-100-BW terminals connected to the same network. ˁÎåôÍáóë ¨Óõâîåô íáóë© Set the subnet mask assigned by the network administrator. Since a subnet mask specifies which network you belong to, it should set up along with the IP address. ˁÇáôå÷áù ¨Äåæáõìô çáôå÷áù© Set the address of the default gateway. Setup is required when connecting to a different network through a router.
-10 Network Menu ǪÓôáòôõð ôùðå 1. Select the item to setup. ˁ Äéóáâìåä ¨Æáãôïòù óåôõð© DHCP is not executed when the terminal started up. ˁ Áððìéãáôéïî âïïô DHCP is executed before the application is executed. The application file is selected from [1:System], and then[2:Auto execute], DHCP function is executed before application , after the terminal started up. In addition, when the application is started up from , DHCP is not executed.
Chapter 3 System menu ³±°³ ÆÔÐ Set up for using the FTP client function, as described below. Automatic setup is possible when the DHCP function is enabled. 1. From the Network, select "3:FTP". Select the item to setup. ˁ Óåòöåò áääòåóó ˁ Õóåò îáíå ˁ Ðáóó÷ïòä ˁ Áäöáîãåä ǪÓåòöåò áääòåóó Set up the host name for FTP server. 1. Select from either IP, or, URL. ˁ Áääòåóó The IP address setup at 2:IP" is set as FTP server. ˁ Îáíå The host specified at "3: host name" is set as FTP server.
3-10 Network Menu ǪÕóåò îáíå Specify the FTP server login user name using up to 18 alphanumeric characters, and upper-case/lower-case should be distinguished. 1. Input the User name. User name should not include the space. ǪÐáóó÷ïòä Specify the FTP server login password using up to 20 alphanumeric characters, and upper-case/lower-case should be distinguished. 1. Input the Password. The Password is converted to a hidden character (*) and is displayed for security purpose.
Chapter 3 System menu ǴÓåòöåò ðïòô Specify FTP server control port number. The well-known port is 21. ǴÍïäå The default is Passive mode. If the FTP server does not support Passive mode, change it to the Active mode.
3-10 Network Menu ³±°´ ÄÎÓ Set the DNS server address, as described below. Automatic setup is possible when the DHCP function (P.3-34) is enabled. 1. From the Network, select "4:DNS". 2. Select the item to setup. ǴÐòéíáòù Set the IP address for the Primary server. ǴÓåãïîäáòù Set the IP address for the Secondary server. ǴÁäöáîãåä ˁ Óåòöåò ðïòô Specify the control port number for the DNS server. The well-known port is 53. ˁ Ôéíå ïõô ôéíå Setup range is from 1 to 99 seconds.
Chapter 3 System menu ³±°µ ÓÎÍÐ Make the various SNMP settings. Automatic setup is possible when the DHCP function (P.3-34) is enabled. 1. From the Network, select "5ȇSNMP". Select the item to setup. ˁ Ãïííõîéôù¨Ò¯Ïîìù© óåôôéîç ˁ Ãïííõîéôù¨Ò¯×© Óåôõð ˁ Ôòáð ˁ Áäöáîãåä ǪÃïííõîéôù¨Ò¯Ïîìù© óåôôéîç 1. Input the community name and the manager IP address. ǴÃïííõîéôù îáíå The operations permitted for a community name are read only. GET and GET-NEXT requests are supported under a community name.
3-10 Network Menu ǪÃïííõîéôù¨Ò¯×© Óåôõð 1. Input the community name and the manager IP address. ǴÃïííõîéôù îáíå The operations permitted for the community name are "Read-Write". GET, GET-NEXT and SET request are supported under a community name. The community name can be specified using a maximum of 16 alphanumeric characters. ǴÍáîáçåò ÉÐ áääòåóó Set the SNMP manager's IP address, which permits The use of the community name set under the [community name]option. If "000.000.000.
Chapter 3 System menu ǪÁäöáîãåä ǴÁõôèåîôéã® ôòáð Set the action of authentication trap to either "send" or "don't send" when access is recognized except from the community name and SNMP manager's IP address set in "1: Community (R/Only)" and "2: Community (R/W)." This Trap is sent to the SNMP manager, which is set in "2:Target address." ǴÁçåîô ðïòô The port number to communicate with SNMP manager. The well-known port is 161. ǴÔòáð ðïòô The port number to transmit the Trap. The well-known port is 162.
3-10 Network Menu ǴÓõððïòôåä Ôòáðó Cold Start Cold Start Transmitted after MIB is initialized and the communications starts. MIB is initialized when the XIT-100-BW has been turned ON using the PW key. Note that MIB is not initialized when the XIT-100-BW has been turned ON in the resume mode. Warm Start Warm Start Transmitted when communication starts except Cold Start.*1 Link up Link up Transmitted when XIT-100-BW synchronizes with an access point.
Chapter 3 System menu ³±± Òåãåéöéîç Íåîõ Receiving files via WLAN, or Bluetooth. The XIT-100-BW can receive files transmitted from a host computer via WLAN, or Bluetooth. Before receiving a file, please check the following. The received files are all created in the F drive. Ǵ×ÌÁÎ Ȇ The communication setting (IP address, SSID, WEP etc.) between the XIT-100-BW and the Access point are correctly set up. Ȇ The power of the access point and host computer is ON.
3-11 Receiving Menu 2. Selecting receiving method. Select "1: Select from list " to obtain the file list from the transmission side. The receiver side can select the file to receive from the list. Select "2:Wait(PC)" or "3:Wait(XIT)”, then get into receiving waiting status immediately. If it is the transmission from the host computer select "2:Wait(PC)", when it is from XIT, Select "3:Wait(XIT)". The receiving file depends on the transmission side.
Chapter 3 System menu 5. Receiving is completed. When many files are checked,"(the number of success/ the number of checked)" is displayed in the Message box. Press the 3-46ġ key, or key.
3-12 File Menu ³±² Æéìå Íåîõ By searching the targeted file, varieties of operations such as transmission and Deletion are performed. Select the file for operation from the classified file list in each drive. The files are recognized by the extensions (3 characters following after the period of the file name), and classified as below. Åøôåîóéïî Ëéîä ïæ á æéìå OUT Application WAV, MP3, SFL Audio BMP Bitmap Others Data Operation is that can be executed are as follows.
Chapter 3 System menu Bit rate 32/40/48/56/64/80/96/112/128/160/192/224/256/320(kbps) Channels Monaural/Stereo Extension SFL Format Audio file list (text style) MAX items 32 Explanation By using SFL file, many audios and files can be played continuously. In the file list, the file name is cited by line feeding to the MAX 32 items. The cited audio file should be stored in the terminal beforehand. The file names written in the file list are all played only once.
3-12 File Menu 3. File operation. File alone check box operation (apply checks /remove checks) is performed by the key. For other operation, press the the Operation. key, From the Sub menu, Select ˁ Åøåãõôå ˁ Ðìáù ˁ Öéå÷åò ˁ Ðòïðåòôéåó ˁ Õðìïáä ˁ Äåìåôå ˁÔåóô ˁ Áìì ãèåãëó áððìéåä ˁ Áìì ãèåãëó òåíïöåä ǪÅøåãõôå 1. From the Sub menu, select "Execute".
Chapter 3 System menu ǪÐìáù 1. From the sub menu, select "Play". Òåçáòäìåóó ïæ ôèå ãèåãë âïø óôáôõó¬ Óåìåãôåä áõäéï æéìå ðìáùó® Press the key to stop and playing. ǪÖéå÷åò 1. From the Sub menu, select "Viewer". Òåçáòäìåóó ïæ ôèå ãèåãë âïø óôáôõó¬ Óåìåãôåä âéôíáð æéìå éó äéóðìáùåä® Press any key to return to the previous operation. ǪÐòïðåòôéåó 1. From the Sub menu, select "Properties". Òåçáòäìåóó ïæ ôèå ãèåãë âïø óôáôõó¬ Óåìåãôåä æéìå§ó ðòïðåòôéåó áòå äéóðìáùåä® Following properties are displayed.
3-12 File Menu ǪÕðìïáä When uploading, please check the following beforehand. Ǵ×ÌÁÎ Ȇ The communication setting (IP address, SSID, WEP etc.) between the XIT-100-BW and the Access point are correctly set up. Ȇ The power of the access point and host computer is ON. Ȇ The access point and host computer is correctly setup or connected. Ȇ The access point is normally operating. Ȇ FTP server is running on the host computer. Ȇ FTP setup (host name, user name etc.) of XIT-100-BW is correctly setup.
Chapter 3 System menu 3. Upload start. Upload status is displayed. 4. Upload is completed. When many files are checked, (the number of upload success / the number of checked items)" is displayed in the "Message box". Press the key, or key. ǪÄåìåôå 1. From the sub menu, select "Delete". Delete the file whose check box is checked. However, if there is no checked file, Selected file is deleted. Confirmation dialog is displayed. Select[Yes]or [No]. In addition, Press the 3-52ġ key, and [No] is selected.
3-12 File Menu ǪÔåóô Test the file whose check box is checked. However, if there is no checked file, Selected file is tested. When the tested file is broken, file delete confirmation dialog is displayed. Select[Yes][No]. In addition, press the key, and [No] is selected. When[Yes]is selected, the file is deleted immediately. When [No] is selected, nothing will be performed. After the Select, restart the next file testing.
Chapter 3 System menu ǪÁìì ãèåãëó òåíïöåä Remove the check from all the check boxes.
3-13 ID Menu ³±³ ÉÄ Íåîõ Setup the ID number for identification. Setup the unique number for each terminal. When DHCP function is enabled automatic setup is also possible. 1. From the System menu, select "6:ID". Input the terminal ID. The number of ID allowed to set is from 000 to 999.
Chapter 3 System menu ³±´ Äåöéãå Íåîõ Setup the hardware device such as Barcode and key. The Device Menu is further classified for each devices. 1. From the System menu, select "7:device". Select the item to setup. ˁ Âáòãïäå ˁ Ëåù ˁ Âìõåôïïôè ˁ Äéóðìáù ˁ Ôïîå¯Öéâòáôïò ³±´± Âáòãïäå 1. From the Device Menu, select "1:Barcode". Select the item to setup.
3-14 Device Menu ǪÔòéççåò íïäå This mode is used to setup the operational condition of the laser scanner on the System menu or the XIT-100-BW browser. This setup is only enabled with the application using "Trigger mode" for barcode scanning. WebGlider-X browser is one of the applications using trigger mode. 1. Select the item to setup. Select the item to setup.
Chapter 3 System menu ǴÐï÷åò óáöéîç Setup for saving the power consumption when scanning. 1. From the sub menu, select the item. ˁ Æõìì When a Barcode is scanned the laser stops automatically and the power supply to the scanner part stops as well. The consumed power gets small, but it takes time to start the next scanning. ˁ Ñõéãë When a Barcode is scanned the laser stops automatically but the power supply to the scanner part continues as well.
3-14 Device Menu ǪÄåãïäå ìåöåì Setup the permissible range of the Barcode scanning. When the Decode level is set to "strict", the barcode label checked strictly. For this reason the label of poor quality get difficult to scan, but the possibility of miss scanning becomes low. On the other hand, when the Decode level is set to "loose", the barcode label of comparatively poor quality can be scanned, but the possibility of miss scanning becomes high.
Chapter 3 System menu ǪÓãáîîéîç áîçìå Setup the irradiation angle of the laser. 1. Select from either Wide or Narrow. ˁ ×éäå¨äåæáõìô© The irradiation angle of the laser widens. ˁ Îáòòï÷ The irradiation angle of the laser becomes narrow. ǪÒåöåòóå Scan setup of White/ black Reversed Barcode 1. Select from either Prohibition, or, Permission. ˁ Ðòïèéâéôéïî ¨äåæáõìô© Normally, the barcode with black bar and white space only scanned.
3-14 Device Menu ³±´² Ëåù Press and hold the direction ( to ) key, the direction key is allowed to enter itself repeatedly. The time (Key repeat delay): From the time when the press and hold started until it get into the first repeated entering, and the time (Key repeat rate): until the entering repeated. (example) repeat delay:1 second, repeat rate:500milli seconds 1. From the Device menu, select "2: key". Current setup contents are displayed. Setup allowed time is from 0100 to 1000milli seconds.
Chapter 3 System menu ǪÌïãáì äåöéãå Local device setup. 1. Select the item to setup. ˁ Äåöéãå îáíå ˁ Óåãõòéôù ˁ Öåòóéïî As "BD Address" is fixed, setup contents cannot be changed. Ïîìù äõòéîç ôèå ìïãáì äåöéãå óåôôéîç¬ ôèå óåáòãè æòïí ôèå Òåíïôå äåöéãå éó óåáòãè éó áããåðôåä® Éî ïôèåò ãáóå¬ ôèå óåáòãè éó îïô áã ãåðôåä® The setup contents in each item are not saves as it is. In order to save the setup contents, press the key or key, and select [Yes] in the Save confirmation dialog.
3-14 Device Menu ǴÓåãõòéôù Perform the authentication related setup when connecting. 1. Operate the check box to enable the authentication. When a check box is checked, the authentication is performed in case the local device received connect request from a Remote device. Only the Remote device with enabled authentication will be permitted to connect. 2. PIN code setup PIN (Personal Identification Number) code is a password used for authentication.
Chapter 3 System menu ǪÒåíïôå äåöéãå Remote device setup. 1. Select the item to setup. ˁ Äåöéãå ìéóô ˁ Óåáòãè æïò äåöéãåó ˁ Óåòãè ïðôéïîó ǴÄåöéãå ìéóô Remote device properties to connect can be registered MAX 7 items. Once registered beforehand, you don't have to set the device properties for each connection. 1. Select the item number to register Select the item number, setup the device properties in order.
3-14 Device Menu 2. Select the item to setup. ˁ Äåöéãå îáíå ˁ ÂÄ Áääòåóó ˁ Óåãõòéôù The operation procedure of device name for security is same as that of the local device. Press the key to search the Remote device. To setup the detected Remote devices the registered device is also possible. ǴÂÄ Áääòåóó 1. Input the BD Address. BD address is a device unique hardware address. It is the fixed length of 16 digit character (0 to 9, A to F) 12 digits. ǴÄåöéãå óåáòãè Searches the Remote device.
Chapter 3 System menu 2. The search result list is displayed. The device name list of the detected remote device is displayed. Ôèå äåöéãå îáíå ôèáô ãáî âå äåôåãôåä éó ìéíéôåä ôï áìðèáîõíåòéã ãèáòáãôåòó® Âå óõòå îïô ôï õóå ôèå ËáîáËáîêé áó ôèå äåöéãå îáíå ïæ ôèå èïóô ãïíðõôåò® Press the key, and Selected Remote device's device name and BD address are displayed. Press the key, to return to the previous operation. 3. Select detected remote device.
3-14 Device Menu ǴÓåáòãè ïðôéïî Set the upper limit of the number of Remote devices detected by device search. 1. Input the number of devices for search. The number of devices allowed to setup is from 1 to 9. The more the number of devices for search is the longer the search time becomes.
Chapter 3 System menu ³±´´ Äéóðìáù 1. From the Device, select "4:Display". Select the item to setup. ˁ Ãïîôòáóô ˁ Ìõíéîïóéôù ǪÃïîôòáóô 1. Display Contrast Adjustment. The contrast of the display can be adjusted from 1 to 8. Press the key for Up, key for Down, then the slider moves. The contrast changes in real time in line with the slider's upward and downward movement, the status of the contrast level can be checked immediately. The relationship between level value and contrast is as follows.
3-14 Device Menu ³±´µ Ôïîå¯Öéâòáôïò Setup the device such as Sound, LED and Vibrator to alert the worker's attention. 1. From the Device, select "5:Tone/Vibrator". Select the item to setup. ˁ Öïìõíå ˁ Éîäéãáôïò æõîã ˁ Ãìéãë óïõîä ǪÖïìõíå 1. Adjust Speaker volume. It is adjustable from 1 to 8. move the slider. key for Up, key for Down to As the sound volume changes in real time in line with the Up and Down movement of the slider, the status of the level value can be checked immediately.
Chapter 3 System menu There are 5 scenes that represent working such as pressing the key (click) and confirming etc. And one user's scene, these 6scenes are provided with three patterns respectively. 1. Select the indicator to set. The icon to show the setup status of the indicator is displayed in right of the lower part on the display. ȇBuzzer is setup. ʴȇAudio is setup. ȇVibrator is setup. ȇLED is setup. Press the key, and sub menu is displayed. ˁ¢Ðòåöéå÷¢ Current indicator can be experienced.
3-14 Device Menu ǴÏðåòáôéïîáì ãïîäéôéïî ïæ á äåöéãå In the operation condition, there are two kinds, one is common to all devices and the other is unique to the device. 1. Enable check box operation (common to all devices). The switch to turn ON/OFF the operation of the device. When checked, the device operates, and when the check is removed the device does not operate unconditional to other setups. This setup is displayed as an icon. Press the key, and sub menu is displayed.
Chapter 3 System menu 3. Selecting a file name (audio only). Select the audio file from the file list. Press the played. key, and properties related to the selected file is dis- Select the "built in audio ". The audio file list that is stored beforehand in the system area of the terminal is displayed. ×èåî áî åøôåîóéïî óðåãéæéåó ôèå Íг ïò ÓÆÌ æéìå ïî ôèå éîäéãáôïò¬ ÷éìì îïô âå ðìáùåä âù ôèå áððìéãáôéïî õîìåóó ôèå Ìéâòáòù ìéîëåä ïî ôèå áððìéãáôéïî éó Öåò®±®±° ïò ìáôåò® 4. Color Select (LED only).
3-14 Device Menu 7. Input the number of times to repeat (Common to all devices). The number of times to repeat the operation on and off. The setup range is from 00 to 99. If 00 is set, it repeats until the device is operated. ǪÃìéãë Óïõîä Setup whether to play the sound or not when the key at the terminal is pressed. The sound can be selected from "Single Beep sound" and "Numeric read out audio ". Click sound is played immediately when the key is pressed.
Chapter 3 System menu ³±µ Íáîáçå Íåîõ Checking the standard properties of XIT-100-BW and improvement and maintenance of the performance. 1. Select the item to setup. Select the item to setup. ˁ Âáôôåòù ìåöåì ˁ Óùóôåí öåòóéïîó ˁ Éîéôéáìéúå ˁ Ãìïîå ˁ Äòéöå ˁ Íïôèâáìì ˁ ×éúáòä ³±µ± Âáôôåòù ìåöåì Check the Battery level of the battery pack. Just look at the Battery level as a reminder. 1. From the Management select "1:Battery level". Battery level is displayed in 6 stages.
3-15 Manage Menu ³±µ² Óùóôåí öåòóéïîó The handy terminal system program (OS) version is displayed. 1. From the Management, select "2:System versions". OS version is displayed. ³±µ³ Éîéôéáìéúå Initializing the Registry and the drive. When the initialization is performed, the setup contents will return to the Factory setup and all files will be deleted. When you perform the initialization take deepest cares with this understanding. 1. From the Management, select "3:initialize".
Chapter 3 System menu Press the key, and sub menu is displayed. ˁ¢Áìì ãèåãëó áððìéåä¢ Apply checks to all check boxes. ˁ¢Áìì ãèåãëó òåíïöåä ¢ Remove all checks from the check boxes. 2. Initialization start. The checked items are initialized in order. 3. Initialization is completed. Press the key, or key. When the Registry is initialized, turn off the power.
3-15 Manage Menu ³±µ´ Ãìïîå Copying the contents on the Registry and F drive of the other XIT-100-BW, duplication is created. 1. From the Management, select "4:Clone". In the case of to copy XIT-100-BW, select "1:Master ". In the case of to be duplicated on XIT-100-BW, select "2:Copy".
Chapter 3 System menu ǪÍáóôåò Setup the "Copy XIT-100-BW" on the default device of the Master beforehand 1. Select the item to clone. After confirming that the Copy terminal is in the condition to be able to "Clone", press the key to start Clone. Press the key, and sub menu is displayed. ˁ¢Áìì ãèåãëó áððìéå䮢 Apply checks to all check boxes. ˁ¢Áìì ãèåãëó òåíïöåä ¢ Remove all checks from check boxes. 2. Clone is completed. Press the 3-78ġ key or key.
3-15 Manage Menu ǪÃïðù 1. Initializing itself. Execute confirmation dialog is displayed. Select from either [Yes] or [No]. In addition, press the key, and [No] is selected. 2. It is in the state the Clone is enabled. Press the key or key to start Clone. 3. Confirm master display. At the Copy terminal side, it cannot confirm that the Clone has completed, be sure to confirm that the transfer has completed on the display at the Master file.
Chapter 3 System menu ³±µµ Äòéöå Confirmation of various properties and maintenance for the drive is performed. 1. From the Management, select "5:Drive". Selecting a drive. 2. The properties of the drive are displayed. Following properties is displayed. ˁÃáðáãéôù ˁÕóåä óðáãå ˁÆòåå óðáãå ˁÆéìåó¨Õóåä îõíâåò¯Íáø îõíâåò© F drive can be optimized by performing defrag. Press the key, and a dialog is displayed.
3-15 Manage Menu ³±µ¶ Íïôèâáìì Setup to suppress the consumption of the battery when the XIT-100-BW is not used for a long period. 1. From the Management, select "6:Mothball". Execute confirmation dialog is displayed. Select [Yes] or [No]. Then, press the key, and [No] is selected. 2. Preparation for prolonged storage is complete. Press the key or key. Turn OFF the Power. ³±µ· ×éúáòä The wizard executed at the initial boot of the terminal can be called back again.
Chapter 3 System menu ³±¶ Ôåóô Íåîõ Hardware device test. 1. From the System menu, ̏elect "9:Test". Select the item to setup. ˁ ×ÌÁÎ ˁ Âìõåôïïôè ˁ Âáòãïäå ˁ Äéóðìáù ˁ Ëåù 2. Select target device. ³±¶± ×ÌÁÎ Test for Wireless Communications and the test for IP Network communication. 1. From the test, select "1:WLAN".
3-16 Test Menu ǪÃïîæéçõòáôéïî Setup the execute condition of the ping command. Wireless test is performed by ping. 1. Select "1:Configuration". ǴÈïóô áääòåóó Specifies the IP address of the targeted device to confirm the communication. Ǵ Ðáãëåô óéúå ¨äåæáõìô ±´·² âùôåó© Select the size of the data packet (in bytes) to be transmitted. permissible value ȇ32, 64, 128, 256, 512, 1024, 1472 ǴÔéíå ïõô ôéíå ¨äåæáõìô ³ óåãïîäó© Time out time is setup by 1 seconds unit.
Chapter 3 System menu Ǫ×ÌÁίðéîç ôåóô WLAN test is performed by executing the ping command. The ping packet is continuously transmitted to the Host IP address setup at "Configuration". Displayed contents are the result of ping command, the MAC address of the synchronized access point, communication quality (LinkQ), the received radio signal strength(ASL), applied channels and the transmission speed. 1. Select "2:WLAN/ping test". <1st line> The title of this test.
3-16 Test Menu ǪÁÐ Óåáòãè To search the access point matches the SSID setup on the terminal. When the SSID of the terminal is setup to "ANY", it is possible to search all the access points around there. Ôèéó éó ïîìù ðåòæïòíåä ÷èåî ôèå óåôõð áô ôèå áããåóó ðïéîô¬ éó óåô õð áó òåóðïîä ôï ¢ÁÎÙ¢® Æòïí óåãõòéôù§ó ðïéîô ïæ öéå÷¬ ôèå òåóðïîóå ôï ¢ÁÎÙ¢ íáù âå äéóáâìåä® Displayed contents as a result of searching are MAC address, channel, SSID. 1. Select "3:AP Search". 2.
Chapter 3 System menu 4. Select an access point, the confirmation screen is displayed to set the SSID setup on the access point to the terminal. Confirmation screen is displayed to allow the SSID setup on the access point to the terminal. ³±¶² Âìõåôïïôè By using other terminal and Bluetooth, one to one communication is performed. 1. From the Test, select "2:Bluetooth". Select the connecting method with Bluetooth device. Master has the leadership on connection, and the Slave obey the Master's direction.
3-16 Test Menu ³±¶³ Âáòãïäå Barcode scanning test perform. In addition, this barcode scanning test is not subject to trigger mode. 1. From the test menu, select "3:Barcode". Barcode is scanned in a normal scanning mode. The scanned Barcode, the kind of Barcode, and the digit number are displayed. Press and hold the scan key for 1 second to get into the continual scan mode. While the scan key is pressed, the laser irradiates, and continues scanning the barcodes.
Chapter 3 System menu ǪÂáòãïäå Ïðôéïî Press the key to allow setting varieties of barcode options. In addition, this setup only enabled during the barcode testing. ǴÃèåãë äéçéô Setup whether to check the check digit. ˁ ÛÃèåãë ÅîáâìåÝ éó óåô ôï ÏÆÆ ¨äåæáõìô© The check of check digit is disabled. ˁ ÛÃèåãë ÅîáâìåÝ éó óåô ôï ÏÎ The check of check digit is enabled. ǴÊÁίÅÁίÕÐà Setup the scanning condition of add-on code of JAN/EAN/UPC. ˁ Éçîïòå Áääïî ¨äåæáõìô© Add-on code scanning disabled.
3-16 Test Menu ³±¶´ Äéóðìáù Display test. 1. From the Test, select "4:Display". Test the function of LCD. When test starts the backlight turns ON automatically. However, when the Battery level is low it does not turn ON. Each time by pressing the key except for the play contents switches like slides. key, 4 kinds of dis- 1. 12 dot font-various double width character ɫ 2. 16 dot font-various double width character ɫ 3.
Chapter 3 System menu ³±¶µ Ëåù The key input test are performed with the indicator(buzzer/vibrator/LED/audio play) tests. Press the key, and display the icon on the partition of the center got Highlighted ( key only reversed), and the icon corresponds to the key appears under the partition line (local eco). And the indicator corresponding to each key operates. The indicator assigned to each key is as follows.
Ãèáðôåò ´ ´ ġ ÆÁÑ ¨Æòåñõåîôìù Áóëåä Ñõåóôéïîó©
Chapter4 FAQ ´± ÆÁÑ FAQ (Frequently Asked Questions) This chapter lists frequently asked questions, problems and operations that need to be performed to solve problems, and reference pages for items in this manual.
4-1 FAQ Ѻ Ôèå Óùóôåí Íåîõ äïåó îïô óôáòô® Ǫ Éó ôèå ¢áððìéãáôéïî¢ óåô ôï ¢Áõôï åøåãõô墿¨Ð®³±µ© From the System menu, select "1ȇSystem setup", and then select "1:Auto execute" to set the System menu for automatic launch.
Chapter4 FAQ Ѻ É ãáîîïô ðåòæïòí ÷éòåìåóó äáôá ãïííõîéãáôéïîó® Ǫ Éó ôèå áããåóó ðïéîô ãïîîåãôåä ôï ôèå Åôèåòîåô ÌÁο If the LAN cable has fallen out or a link is not established, some access points do not perform wireless communications. ¼×èåî ôèå ÁÌÁÒÍ ÌÅÄ ìéçèôó Ïξ Ǫ Éó ôåòíéîáì ÓÓÉÄ óåôôéîç ôèå óáíå áó ôèå áããåóó ðïéîô ÓÓÉÄ óåôôéîçó¿¨Ð®³²²© Please set the access point SSID and terminal SSID the same.
4-1 FAQ Ѻ É ãáîîïô ðåòæïòí Âìõåôïïôè ãïííõîéãáôéïî® Ǫ Èáó ôèå Òåíïôå äåöéãå ôï âå ãïîîåãôåä óåô áó äåæáõìô äåöéã忨Ю³¶´© Ǫ Áòå ôèå Òåíïôå äåöéãå ôï âå ãïîîåãôåä áîä ôèå Óåãõòéôù óåôôéîç éäåîôé ãá쿨Ю³¶²© Ǫ Èáó ôèå Òåíïôå äåöéãå ôï âå ãïîîåãôåä óåôõð ãïòòåãôìù¿ ȆDoes the Power turn ON? ȆIs the connecting enabled? Ǫ Éó ôèå ãïîîåãôéîç ðòïãåäõòå ãïòòåãô¿ ȆConnect the PC and XIT-100-BW (P.1-9) ȆCommunication between the XIT-100-BW terminals (P.3-44ȡ46) ȆBluetooth Clone (P.3-77) ȆBluetooth Test (P.
Chapter4 FAQ Ѻ ¢Ãïîîåãôéïî Æáéìåä¢ ÷áó äéóðìáùåä äõòéîç ôòáîóíéóóéïî ïò òåãåðôéïî ïæ á æéìå® Ǫ Èáöå ôèå ãïííõîéãáôéïî óåôõð æïò ÷éòåìåóó ãïííõîéãáôéïîó áîä ôèå îåô÷ïòë óåôõð âååî ðåòæïòíåä ãïòòåãôìù¿¨Ð®±¸© Ǫ Éó ôèå ÆÔÐ óåòöåò òõîîéîç ïî ôèå èïóô ãïíðõôåò¿ Ǫ Áòå ôèå áããåóó ðïéîô ¨ïõò òåãïííåîäåä éôåí© áîä ãïíðõôåò ãïîîåãôåä ãïò òåãôìù ôèòïõçè ôèå ÌÁÎ ãéòãõéô¿¨Ð®±¸© Ǫ Èáöå ôèå ÆÔÐ óåôôéîçó âååî íáäå ãïòòåãôìù¿ ¨Ð®³³¶© Ǫ Èáó ôèå ÂìõåÐïòôåò òõîîéîç ïî ôèå èïóô ãïíðõôåò¿ Ǫ Éó éô ãïîîåãôåä ôï ôè
Áððåîäéø® Á µ ġ Óùóôåí Íåîõ Æáãôïòù Óåôôéîçó Ìéóô
Appendix A System menu Factory Settings Áððåîäéø® Á± Óùóôåí íåîõ Æáãôïòù Óåôôéîçó Ðáòáíåôåòó Ðïóóéâìå Óåôôéîç Òáîçå Æáãôïòù Óåôôéîçó Auto execute System menu or application System menu Resume Enable, Disable Disable Password Alphanumeric characters from 4 to 30, Upper-case character/Lower-case character are distinguished.
Appendix. A-1 System menu Factory Settings Ðáòáíåôåòó Ðïóóéâìå Óåôôéîç Òáîçå Æáãôïòù Óåôôéîçó IP address Any value of IP addressġ style 000.000.000.000 NetMask Any value of IP addressġ style 000.000.000.000 Gateway Any value of IP addressġ style 000.000.000.
Appendix A System menu Factory Settings Ðáòáíåôåòó Ðïóóéâìå Óåôôéîç Òáîçå Æáãôïòù Óåôôéîçó SNMP Authentication Trap Send, Not send Not send SNMP Agent port 00001 to 65534 00161 SNMP Trapport 00001 to 65534 00162 ID 000 to 999 000 Barcode Trigger operation Normal, Double, Release, Auto Normal Barcode Power saving Full, Quick, None Full Barcode Irradiation time 00 to 60 20 (seconds) Barcode Decode level Loose, Normal, Strict Normal Key repeat delay 0000 or, from 0100 to 1000 0500
Áððåîäéø® Â ¶ ġ Óáíðìå Âáòãïäå
Appendix. B Sample Barcode Áððåîäéø® ± Óáíðìå Âáòãïäå ǪÊÁα³ ǪÊÁθ ǪÕÐÃÅ ǪÃÏÄų¹¨Ã¯Ä© ( # $ % & ' * (notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
Appendix. B-1 Sample Barcode ǪÃÏÄų¹¨Îï ïĩ # $ % & ' ( C C D D ǪÎ×·¨Ã¯Ä© ǪÎ×·¨Îï ïĩ E E F F 㪸㩷㪘㩷㪙㩷㪚㩷㪛㩷㪜㩷㪝㩷㪸 㪹㩷㪛㩷㪜㩷㪝㩷㪘㩷㪙㩷㪚㩷㪹 ǪÎ×·¨ÈÅØ© (notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
Appendix. B Sample Barcode ǪÉÔƨïĩ ǪÉÔƨÎï ïĩ ǪÉÔƨÓôáîäáòä ÉÔƱ´© ǪÉÔƨÅøôåîäåä ÉÔƱ¶© (notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
Appendix. B-1 Sample Barcode ǪÉÔƨÁää ïî öåòóéïî ÉÔƶ© ǪÃÏÄű²¸¨Ãïäå óåô Á© G H # $ % & ' ( ǪÃÏÄű²¸¨Ãïäå óåô © C D E F ǪÃÏÄű²¸¨Ãïäå óåô é (notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
Appendix. B Sample Barcode ǪÅÁα²¸¨Ãïäå óåô Á© ǪÅÁα²¸¨Ãïäå óåô © ǪÅÁα²¸¨Ãïäå óåô é (notes) It is not likely to be able to read because of low printing quality (Expansion, Reduction, Dirt, etc.).
· ġ Éîäåø
Index Éîäåø ᴾ Access point ................................................. xiv, 1-7 Access point search........................................... 3-85 Active mode ...................................................... 3-38 Ad-hoc mode....................................................... 1-7 Advanced (FTP)................................................ 3-37 Advanced (SNMP)............................................ 3-42 Advanced(WLAN Security).............................. 3-31 Advanced(WLAN).......
Index ᵁ Data communication Method Bluetooth communications............................ 1-9 WLAN communications................................ 1-8 Data communication/preparation of Bluetooth communication ............................. 1-8 WLAN communication ................................. 1-7 Data storage ...............................................1-22, 2-2 Dead Zone......................................................... 1-14 Decode level......................................................
Index Key repeat rate (Factory settings) ...................... A-4 KEY setting..................................................... ³²µ ᵉ Laser light irradiation angle .............................. 1-13 LCD .................................................................... 1-2 Local device ............................................... xiv, 3-62 Luminosity ........................................................ 3-68 ᵊ MAC address ....................................................
Index SNMP Community(R/W) Manager IP address (Factory settings) ........................................... A-3 SNMP Trap Community name (Factory settings) ....................................................................... A-3 SNMP Trap Manager IP address (Factory settings) ....................................................................... A-3 SNMP Trapport (Factory settings) ..................... A-4 Software .............................................................. 2-2 Sound ..............
