= Important Safety Notice 1. Do not mix up HDMI to RIS transmitter and RIO to HDMI receiver before Installation. 2. Ba not hot pliers when it is working. 3. Use DCEV/ZA power supply only, Make sure specification matched if using 3rd party adapters. 4. Static hydroelectric will cause damage of the device, please do ESD protection when using the device.
« Package Contents © Transmitter unit xiii Receiver unit XL DESY/2AX1pe rn ca — (Gin [1 & Wassermann Ir blaster extension IR receiver extension cable ripe cable ripe 8 T= Mounting brackets PCs « Installation Requirements L HDMI source device {compute graphics card, DVD, PS3, HD monitoring equipment etx. 2. HDMI display device like HDTV, HDTV, projector with HDMI port. 3. OUTSTRIP CATEGORIZATION cable. Follow standard IEEE-5588, Ris recommended to select a network cable with less loss and crosswalk.
«+ Installation Procedures 1. Connection one to one: abettor Mote: Only the TX deans to be powers wham one to one connection. Follow the standard of IEEE-5688, It is recommended te select a network cable with less loss and crosswalk. | ; SH 2-Orange i A A-Bite §-Green fa 7-Brownshirt Be Brown 2. Connection instruction 1} Connect the source device to the HDMI in port of the transmitter with an HDMI cable, and connect the HDMI out port of the receiver to the display device with another HDMI cable.
2) Cannot the CAT out part of the transmitter and the CAT In port of the receiver vis 5 network cable (CAT6/CATGAJLATT}, 2}1f using HEM loop out, connect the display device to the HDMI OUT port of the transmitter. 4} Plug the power supply into the device to get started. NOTE): Iris recommended to use length range within 2-70m network cable. If the cable is too hart, there may be no display output because the signal is fon strange. If the cabal is tos Lang, tha output may be with poor quality. 3.
«FAQ ©: There is no impute on screen wham all connections are torrent? A: 13 Please make sirs the HDMI cables supports 4Kx2K If the output signal from the source device Is 4Kx 2K resolution, 2) Please check and make sure the network cable insert to the RIO port well, 7) Restart the transmitter or receiver by pressing the reset button, €: Black screen happened on the display/monitor? A: 1) Check if the length af the cable is within tha specified range. 2) Reset the transmitter to re-bully the connection.
Disclaimer Tha product mama and brand mama may be registered trademark of relisted manufactures. ™ and @ may be admitted on the user manual, The pictures in this user manual are just for reference. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc, We reserve the rights to make changes without further notice te a product or system described herein tu improve reliability, function or design.