User's Manual

WHA173K 2.4G wireless Keybard Specification

DIMENSIONS

Keybard

o Height x Width x Depth:

o 20 mm x 130 mm x 280mm

SYSTEM REQUIREMENTS

o Required: 2.4GHz wireless

Windows

10 or later, Windows 8

Mac OS X 10.10 or later

Chrome OS

™

Android

™

5.0 or later

Unifying Receiver

o One Free USB Port

Windows 10 or later, Windows 8, Windows 7

Mac OS X 10.05 or later

Chrome OS

Linux

PAGE 1
WHA173K 2.4G wireless Keybard Specification DIMENSIONS Keybard o o Height x Width x Depth: 20 mm x 130 mm x 280mm SYSTEM REQUIREMENTS o Required: 2.4GHz wireless Windows® 10 or later, Windows 8 Mac OS X 10.10 or later Chrome OS™ Android™ 5.0 or later Unifying Receiver o One Free USB Port Windows 10 or later, Windows 8, Windows 7 Mac OS X 10.
PAGE 2
TECHNICAL SPECIFICATIONS Connection type: 2.4GHz wireless connection Wireless range: 10 m* * It may vary based on use and computing conditions. Battery details: 2 x AAA Battery life: 2 years* * It may vary based on use and computing conditions. INSTRUCTIONS 1) Open the battery cover and load the two 7 dry cells, and cover the battery cover 2) The receiver plugs into the USB port to enter the work mode. 3) Switch the power switch to the ON side, make automatic connection and enter the working mode.
PAGE 3
WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.