User's Manual

i110 User’s Manual

The device complies with part 15 of Fcc Rules .Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

1、 SPECIFICATION。

z Bluetooth Core: Bluetooth V1.2 compliant

z Bluetooth Profile: A2DP, AVRCP

z Operating Frequency: 2.4-2.4835GHz

z Security Features: 128-bit Encryption

z Transmitting Rate: 721Kbps (Max)

z Wireless Technology: FHSS

z Communication Distance: Class 2, up to 33ft (10m)

Brief Introduction of Functions.

i110 Bluetooth Dongle has two operating modes：TX and RX。It has a mode selection switch for shifting modes

and a pairing button for operating pairing.

TX is transmitting mode. By Bluetooth, it can transmit the analog audio signals from acoustic mainframe to other

Bluetooth receiving devices (e.g. Bluetooth stereo headset).

RX is receiving mode. It can receive stereo music from Bluetooth devices, which support A2DP profile (e. g. PC

or Mobile phone supporting Bluetooth). Meanwhile, it can amplify and output the music through acoustic

mainframe.

2、 States and Indicator

PAGE 1
i110 User’s Manual The device complies with part 15 of Fcc Rules .Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1、 SPECIFICATION。 z Bluetooth Core: Bluetooth V1.
PAGE 2
State Blue LED Red LED Power off Off Off Standby flash slowly：flash 1 times every 5s Off Paring Flash 1times in 100ms，then standby state after 3 minutes.
PAGE 3
with the last paired Bluetooth devices until the blue LED flashes quickly; if no connection happens after 10 seconds, it will come into standby mode. z Long press pairing button in pairing state, then pair and connect it with other Bluetooth stereo transmitting devices (e.g., mobile phone and PC) until red and blue lights blinking alternately. The blue LED is long on when paired and connected successfully.