Document of Conformity

ManualsBrandsWeidmueller Manuals1-tierZDUB 2.5-2/2AN/DM OR

IECEx Certificate

of Conformity

INTERNATIONAL ELECTROTECHNICAL COMMISSION

IEC Certification Scheme for Explosive Atmospheres

for rules and details of the IECEx Scheme visit www.iecex.com

Ex COMPONENT CERTIFICATE

Certificate No.: IECEx ULD 16.0036U Issue No: 2 Certificate history:

Issue No. 2 (2019-01-27)

Issue No. 1 (2018-05-21)

Issue No. 0 (2017-03-27)

Status: Current

Date of Issue: 2019-01-27

Applicant: Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16

32758 Detmold

Germany

Ex Component: Feed through and protective conductor terminals, ZDK, ZDU, ZDUA, ZDUB, ZPEA, ZPEB and ZPE with accessories

ZQV and ZQB.

This component is NOT intended to be used alone and requires additional consideration when incorporated into other equipment or systems for

use in explosive atmospheres (refer to IEC 60079-0).

Type of Protection: Increased safety "eb"

Marking:

Ex eb IIC Gb

Approved for issue on behalf of the IECEx

Certification Body:

Lucy Frieders

Position:

Staff Engineer

Signature:

(for printed version)

Date:

1. This certificate and schedule may only be reproduced in full.

2. This certificate is not transferable and remains the property of the issuing body.

3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.

Certificate issued by:

UL International Demko A/S

Borupvang 5A,

DK-2750 Ballerup

Denmark

Page 1 of

2019-01-27

Summary of content (9 pages)

PAGE 1
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Ex COMPONENT CERTIFICATE Certificate No.: IECEx ULD 16.0036U Issue No: 2 Certificate history: Issue No. 2 (2019-01-27) Issue No. 1 (2018-05-21) Issue No. 0 (2017-03-27) Status: Current Page 1 of 5 Date of Issue: 2019-01-27 Applicant: Weidmüller Interface GmbH & Co.
PAGE 2
IECEx Certificate of Conformity Certificate No: IECEx ULD 16.0036U Issue No: 2 Date of Issue: 2019-01-27 Manufacturer: Weidmüller Interface GmbH & Co.
PAGE 3
IECEx Certificate of Conformity Certificate No: IECEx ULD 16.0036U Date of Issue: 2019-01-27 Issue No: 2 Page 3 of 5 Schedule Ex Component(s) covered by this certificate is described below: The feed through and protective terminal blocks Type ZDK, ZDU, ZDUA, ZDUB, ZPEA, ZPEB and ZPE are for the connection of copper conductors in enclosures.
PAGE 4
IECEx Certificate of Conformity Certificate No: IECEx ULD 16.0036U Date of Issue: 2019-01-27 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): Issue 1: Alternate construction. Issue 2: Added Models ZDUB 2.5-2/2AN/RC and ZDUB 2.5-2/4AN/RC.
PAGE 5
IECEx Certificate of Conformity Certificate No: IECEx ULD 16.0036U Date of Issue: 2019-01-27 Additional information: Annex: Annex to IECEx ULD 16.0036U Issue 2.
PAGE 6
IECEx Certificate of Conformity Certificate No.: IECEx UL 16.0036U Issue No.: 2 Page 1 of 4 PARAMETERS RELATING TO THE SAFETY Type & electrical data TYPE Rated Rated Rated Strip Solid Stranded Flexible (V) (A) Resistance length wire wire size wire size (mm2) size (uΩ) [mm] (mm2) (mm2) ZDK 2.5-2V 550 21 See NTI 10 0.5-4 0.5-2.5 0.5-2.5 ZDK 2.5-2/4AN 550 19 See NTI 10 0.5-4 0.5-2.5 0.5-2.5 ZDK 2.5-2 550 21 See NTI 10 0.5-4 0.5-2.5 0.5-2.5 ZDK 2.
PAGE 7
IECEx Certificate of Conformity Certificate No.: IECEx UL 16.0036U Issue No.: 2 Page 2 of 4 ZDUB 2.52/2AN/RC 550 21 See NTI 10 0.5-4 0.5-2.5 0.5-2.5 ZDUA 2.5-2 352 20 See NTI 10 0.5-4 0.5-2.5 0.5-2.5 ZPEA 2.5-2 N/A N/A N/A 10 0.5-4 0.5-2.5 0.5-2.5 ZPEB 2.5-2 N/A N/A N/A 10 0.5-2.5 0.5-2.5 0.5-2.5 ZPE 2.5-2/2AN N/A N/A N/A 10 0.5-4 0.5-2.5 0.5-2.5 ZPE 2.5-2/3AN N/A N/A N/A 10 0.5-4 0.5-2.5 0.5-2.5 ZPE 2.5-2/4AN N/A N/A N/A 10 0.5-4 0.5-2.5 0.5-2.
PAGE 8
IECEx Certificate of Conformity Certificate No.: IECEx UL 16.0036U Issue No.: 2 Page 3 of 4 ZQV 4/6 GE ZQV 4/7 GE ZQV 4/8 GE ZQV 4/9 GE ZQV 4/10 GE ZQB 2.5-2 ZQV 2.5N/2 GE ZQV 2.5N/3 GE ZQV 2.5N/4 GE ZQV 2.5N/5 GE ZQV 2.5N/6 GE ZQV 2.5N/7 GE ZQV 2.5N/8 GE ZQV 2.5N/9 GE ZQV 2.
PAGE 9
IECEx Certificate of Conformity Certificate No.: IECEx UL 16.0036U Issue No.: 2 Page 4 of 4 MARKING Marking has to be readable and indelible; it has to include the following indications: Example of marking Plate (ZDK 2.5-2, representing all models): ROUTINE EXAMINATIONS AND TESTS According to IEC 60079-7, clause 7.1 in combination with clause 6.1 a dielectric strength test has to be carried out.