Document of Conformity

ManualsBrandsWeidmueller ManualsAccessoriesZB 4G GN/GE

00-IC-F0057 – Issue 5.1 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 1 of 3

[1]

EC-TYPE EXAMINATION CERTIFICATE

[2]

Component intended for use on/in equipment or protective system

intended for use in Potentially Explosive Atmospheres

Directive 94/9/EC

[3]

EC-Type Examination Certificate Number:

DEMKO 03 ATEX 136028U

Rev. 1

[4]

Component:

Earthing and Neutral Busbar assembly (see Schedule for components)

[5]

Manufacturer:

Weidmueller Interface GmbH & Co

[6]

Address:

Klingenbergstraße 16, 32758 Detmold, Germany

[7]

This Component and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred

to.

[8]

UL International Demko A/S, notified body number 0539 in accordance with Article 9 of the Council Directive 94/9/EC of 23 March 1994,

certifies that this component has been found to comply with the Essential Health and Safety Requirements relating to design and

construction of components intended for use in potentially explosive atmospheres given in Annex II to the Directive.

The examination and test results are recorded in confidential report no.

12CA09494

[9]

Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN 60079-0:2009 EN 60079-7:2007

[10]

The sign "U" placed after the certificate number indicates that this certificate must not be mistaken for a certificate intended for an

equipment or protective system. This partial certification may be used as a basis for certification of an equipment or protective system.

[11]

This EC-Type examination certificate relates only to the design, examination and tests of the specified component in accordance with the

Directive 94/9/EC. Further requirements of the Directive apply to the manufacturing process and supply of this component. These are not

covered by this certificate.

[12] The marking of the component shall include the following:

II 2 GD Ex eb IIC

Certification Manager

Jan-Erik Storgaard

This certificate may only be reproduced in its entirety and without any change,

schedule included.

Date of issue: 2003-12-18

Re-issued: 2012-08-14

Notified Body

UL International Demko A/S, Ballerup 5A, 2750 Ballerup, Denmark

Tel. +45 44 85 65 65, info.dk@ul.com

www.ul-europe.com

Summary of content (3 pages)

PAGE 1
EC-TYPE EXAMINATION CERTIFICATE [1] e Component intended for use on/in equipment or protective system intended for use in Potentially Explosive Atmospheres Directive 94/9/EC [2] [3] EC-Type Examination Certificate Number: DEMKO 03 ATEX 136028U Rev. 1 [4] Component: Earthing [5] Manufacturer: Weidmueller [6] Address: [7] This Component and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to.
PAGE 2
Schedule EC-TYPE EXAMINATION CERTIFICATE No. DEMKO 03 ATEX 136028U Rev. 1 [13] [14] Report: 12CA09494 [15] Description of Component: Earthing Busbar assembly, consisting of busbar holders type SH… or WEW…, a copper busbar and clamping yokes type ZB…, for the connection of copper conductors in enclosures in type of explosion protection increased safety “e”. The assembly is considered to form one component and are not to be used independently.
PAGE 3
Schedule EC-TYPE EXAMINATION CERTIFICATE No. DEMKO 03 ATEX 136028U Rev. 1 [13] [14] Report: 12CA09494 [16] [17] Descriptive Documents Project Report No.: 12CA09494 (Hazardous Location Testing) Description: Document No.: Rev. Level: Date: Zugbügel ZB 4 441547 0 11.03.2005 Zugbügel ZB 4K 405691 11 11.03.2005 Zugbügel ZB 4G 410332 6 11.07.2006 Zugbügel ZB 4/6 406744 2 23.02.2010 Zugbügel ZB 4/6K 406653 4 09.02.2000 Zugbügel ZBE 6 405472 1 05.12.