Document of Conformity

ManualsBrandsWeidmueller Manuals1-tierWTR 2.5

00-IC-F0061 – Issue 12.0 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 1 of 3

[1] TYPE EXAMINATION CERTIFICATE



[2] Component intended for use in Potentially Explosive Atmospheres

Directive 2014/34/EU

[3] Type Examination Certificate Number: DEMKO 14 ATEX 1389U Rev. 1

[4]

Product: Terminal blocks with fuse holder, test disconnect terminals, fuse plug or no additional feature -

Terminals Catalog Nos. WMF 2.5 FU SW, WMF 2.5 FU 10-36V SW, WMF 2.5 FU 100-250V SW,

WMF 2.5 FU 60-150V SW, WMF 2.5 FU 30-70V SW, WMF 2.5 FU PE SW, WMF 2.5 FU PE 10-36V

SW, WMF 2.5 FU PE 100-250V SW, WMF 2.5 FU PE 60-150V SW, WMF 2.5 FU PE 30-70V SW,

WSI 4, WSI 4/LD 10-36V AC/DC, WSI 4/LD 30-70V AC/DC, WSI 4/LD 60-150V AC/DC, WSI 4/LD

140-250V AC/DC, WSI 6, WSI 6/LD 250AC LLC, WSI 6/LD 10-36V LLC, WSI 6/LD 30-70V LLC, WSI

6/LD 60-150V LLC, WTR 2.5 STB, WTR 2.5, WTR 4 STB, WTR 4, WMF 2.5 DI, WMF 2.5 DI PE,

WMF 2.5 DI PE STB, WTR 4/SI LD 36V, WTR 4/SI LD 150V, WTR 4/SI LD 70V, WTR 4/SI LD 250V,

WTR 4 SI, WMF 2.5

[5]

Manufacturer: Weidmüller Interface GmbH & Co. KG

[6]

Address: Klingenbergstrasse 16, 32758 Detmold Germany

[7] This Component and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to.

[8] UL International Demko A/S certifies that this product has been found to comply with the Essential Health and Safety Requirements

relating to the design and construction of products intended for use in potentially explosive atmospheres given in Annex II to Directive

2014/34/EU of 26 February 2014.

The examination and test results are recorded in confidential report number:

4787478849

[9]

Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN 60079-0:2012+A11:2013 EN 60079-15:2010

except in respect of those requirements listed at item 18 of the Schedule.

[10]

The sign "U" is placed after the certificate number. It indicates that this certificate must not be mistaken for a certificate intended for an

equipment or protective system. This partial certification may be used as a basis for certification of an equipment or protective system.

[11]

This Type Examination Certificate relates only to the design of the specified product, and not to specific items of product subsequently

manufactured.

[12]

The marking of the component shall include the following:

 II 3 G Ex nA IIC Gc

Certification Manager

Jan-Erik Storgaard

This is to certify that the sample(s) of the

Product described herein (“Certified Product”) has been investigated

and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the ATEX

Product

Certification Program Requirements. This certificate and test results obtained apply only to the

product

sample(s) sub

mitted by the Manufacturer. UL did not select the sample(s) or determine whether the sample(s)

provided were representative of other manufactured

product. UL has not established Follow-Up Service or other

surveillance of the

product. The Manufacturer are solely and fully responsible for conformity of all product to all

applicable Standards, specifications, requirements or Directives. The test results may not be used, in whole or in

part, in any other document without UL’s prior written approval.

Date of issue:

2015-04-10

Re-issued: 2016-08-09

Certification Body

UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark

Tel. +45 44 85 65 65,

info.dk@ul.com, www.ul.com

Summary of content (3 pages)

PAGE 1
TYPE EXAMINATION CERTIFICATE [1]  Component intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU [2] DEMKO 14 ATEX 1389U Rev. 1 [3] Type Examination Certificate Number: [4] Product: [5] Manufacturer: [6] Address: [7] This Component and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to.
PAGE 2
Schedule TYPE EXAMINATION CERTIFICATE No. DEMKO 14 ATEX 1389U Rev. 1 [13] [14] [15] Description of Product: The devices are Ex Component terminals for use in explosive atmospheres when installed and used in accordance with the specified Schedule of Limitations. The terminal blocks are suitable for snap-on mounting on TS 35 DIN rail. All models have two screw connections. They have features as indicated in the following table: Model no. WMF 2.5 FU SW WMF 2.5 FU 10-36V SW WMF 2.5 FU 100-250V SW WMF 2.
PAGE 3
Schedule TYPE EXAMINATION CERTIFICATE No. DEMKO 14 ATEX 1389U Rev. 1 [13] [14] Electrical data Model WMF 2.5 FU SW WMF 2.5 FU 10-36V SW WMF 2.5 FU 100-250V SW WMF 2.5 FU 60-150V SW WMF 2.5 FU 30-70V SW WMF 2.5 FU PE SW WMF 2.5 FU PE 10-36V SW WMF 2.5 FU PE 100-250V SW WMF 2.5 FU PE 60-150V SW WMF 2.5 FU PE 30-70V SW WSI 4 WSI 4/LD 10-36V AC/DC WSI 4/LD 30-70V AC/DC WSI 4/LD 60-150V AC/DC WSI 4/LD 140-250V AC/DC WSI 6 WSI 6/LD 250AC LLC WSI 6/LD 10-36V LLC WSI 6/LD 30-70V LLC WSI 6/LD 60-150V LLC WTR 2.