Document of Conformity

ManualsBrandsWeidmueller Manuals120 mm²WPD 108 1X120/2X35+3X25+4X16 GY

Certification Manager: Wu Jianguo Signature:

Date of issue: 2017-11-23

Certification Body: CNEX-Global B.V., Utrechtseweg 310-B38, 6812 AR, Arnhem, the Netherlands

This certificate may only be reproduced in its entirety and without any change, including schedule

CNEX-FM-604E Issue 3 Page 1 of 5

[1] EU-TYPE EXAMINATION CERTIFICATE

[2] Component intended for use on/in equipment or protective systems

intended for use in Potentially Explosive Atmospheres

Directive 2014/34/EU

[3] EU-Type Examination Certificate Number: CNEX 16 ATEX 0005U Issue 1

[4] Components: Modular terminal blocks models WPD 104 – WPD 109

[5] Manufacturer: Weidmueller Interface GmbH & Co

[6] Address: Klingenbergstraβe 16, Detmold D-32758, Germany

[7] This Component and any acceptable variation thereto is specified in the schedule to this certificate

and the documents therein referred to.

[8] CNEX-Global B.V., Notified Body number 2614, in accordance with Directive 2014/34/EU of the

European Parliament and of the Council, dated 26 February 2014, certifies that this component has

been found to comply with the Essential Health and Safety Requirements relating to the design and

construction of components intended for use in potentially explosive atmospheres given in Annex II to

the Directive.

The examination and test results are recorded in confidential Report number: 17018.

[9] Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN 60079-0:2012+A11:2013 EN 60079-7:2015

[10] The sign "U" placed after the certificate number indicates that this certificate must not be mistaken for

a certificate intended for an equipment or protective system. This partial certification may be used as

a basis for certification of an equipment or protective system.

[11] This EU – Type examination certificate relates only to the design and construction of the specified

component. Further requirements of the Directive apply to the manufacturing process and supply of

this component. These are not covered by this certificate.

[12] The marking of the component shall include the following:

II 2 GD Ex eb IIC Gb

Summary of content (5 pages)

PAGE 1
[1] [2] EU-TYPE EXAMINATION CERTIFICATE Component intended for use on/in equipment or protective systems intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU [3] EU-Type Examination Certificate Number: CNEX 16 ATEX 0005U Issue 1 [4] Components: Modular terminal blocks models WPD 104 – WPD 109 [5] Manufacturer: Weidmueller Interface GmbH & Co [6] Address: Klingenbergstraβe 16, Detmold D-32758, Germany [7] This Component and any acceptable variation thereto is specified i
PAGE 2
SCHEDULE EU-TYPE EXAMINATION CERTIFICATE No. CNEX 16 ATEX 0005U Issue 1 [13] [14] Report: 17018 [15] Description of Component: The modular terminal blocks models WPD 104 to WPD 109 are power distribution blocks, where one incoming current supply cable is distributed through one connection block over multiple outgoing cable connections. The insulating body is made of polyamide PA66 and the protective cover is made of polycarbonate.
PAGE 3
SCHEDULE EU-TYPE EXAMINATION CERTIFICATE No. CNEX 16 ATEX 0005U Issue 1 [13] [14] Report: 17018 WPD 106 WPD 106 WPD 106 WPD 106 WPD 107 WPD 107 WPD 107 Solid - Stranded - Flexible with Ferrule Flexible busbar Solid - Stranded Flexible with Ferrule Solid WPD 108 WPD 108 WPD 108 WPD 108 WPD 109 WPD 109 WPD 109 WPD 109 1x 4…35 1x 4…35 1x 2,5…25 - 1x 10…70 1x 10…70 1x 6…50 - 15.5 x 5 mm2 1x 16…95 1x 16…95 1x 10…70 - - 1x 4...35 1x 4...35 1x 2,5…25 - 3x 1.5…16 4x 2.5…25 4x 2.5…25 4x 1.
PAGE 4
SCHEDULE EU-TYPE EXAMINATION CERTIFICATE No. CNEX 16 ATEX 0005U Issue 1 [13] [14] Report: 17018 [17] Schedule of Limitations: The modular terminal blocks models WPD 104 to WPD 109 shall always be installed inside suitable certified enclosures. For use in flammable gases these enclosures must satisfy the requirements conform EN 60079-0 and EN 60079-7. For use in combustible dust these enclosures must satisfy the requirements conform EN 60079-0 and EN 60079-31.
PAGE 5
SCHEDULE EU-TYPE EXAMINATION CERTIFICATE No. CNEX 16 ATEX 0005U Issue 1 [13] [14] Report: 17018 [18] Essential Health and Safety Requirements: Concerning ESR this Schedule verifies compliance with the Annex III of 2014/34/EU directive only. The manufacturer's Declaration of Conformity declares compliance with other relevant requirements and Directives.