User Documentation

ManualsBrandsWeidmueller ManualsApplication rangeWMF 2.5 DI SW

Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany

Version: Type Order No

WMF 2.5 DI* 1143020000

WMF 2.5 DI PE* 1143030000

WMF 2.5 DI PE STB* 1167340000

Accessories: Order No

End Plate AP WMF 2.5* 1142990000

End bracked WEW 35/2* 1061200000

Terminal rail TS 35/… acc.to DIN EN 60715

Cross-connection Pluggable* Order No

ZQV 2.5N/2 1693800000

ZQV 2.5N/3 1693810000

ZQV 2.5N/4 1693820000

ZQV 2.5N/5 1693830000

ZQV 2.5N/6 1693840000

ZQV 2.5N/7 1693850000

ZQV 2.5N/8 1693860000

ZQV 2.5N/9 1693870000

ZQV 2.5N/10 1693880000

- Type Wemid

CTI ≥ 600

Test - Disconnect Terminal Blocks: WMF 2.5 DI

Insulation material:

- Operating temperature range

- Tracking resistance (A) to IEC 60112

- Flamability class to UL 94

* in all colours

INSTALLATION INSTRUCTIONS

& CONDITIONS FOR SAFE USE

Modular TERMINAL Blocks: W- Series

DEMKO 14 ATEX 1389U

IECEx UL 14.0097U

II 3 G Ex nA IIC Gc

Standards:

EN 60079-0:2012/A11:2013 and EN 60079-15: 2010

IEC 60079-0:2011 Rev. 6

IEC 60079-15:2010 Rev. 4

-60°C…+120°C (insulating material limit)

Version: WMF 2.5 DI 4756392 Index: 01 Date: 06.2015

Summary of content (4 pages)

PAGE 1
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany INSTALLATION INSTRUCTIONS & CONDITIONS FOR SAFE USE II 3 G Ex nA IIC Gc Modular TERMINAL Blocks: W- Series DEMKO 14 ATEX 1389U IECEx UL 14.0097U Standards: EN 60079-0:2012/A11:2013 and EN 60079-15: 2010 IEC 60079-0:2011 Rev. 6 IEC 60079-15:2010 Rev. 4 Test - Disconnect Terminal Blocks: WMF 2.5 DI Version: Type WMF 2.5 DI* WMF 2.5 DI PE* WMF 2.
PAGE 2
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Technical data according to IEC/EN 60079-15 (non sparking "nA"): WMF 2.5 DI WMF 2.5 DI PE WMF 2.5 DI PE STB - Rated voltage 500 V 500 V - Rated current 20 A 20 A - Rated current with ZQV 20 A 20 A - Contact resistance with rated conductor, 2.5 mm² with max conductor, 4.0 mm² 1,17 mΩ 1,09 mΩ - Rated conductor cross section 2.5mm² 2.
PAGE 3
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Note: The creepage and clearance distances were determined in the worst case. (with closed or open clamping yoke) If smaller cross sections than the rated cross section are used, the belonging lower current has to be laid down in the IECEx/EC-Type Examination Certificate of the complete apparatus. Mounting instructions: The WMF 2.
PAGE 4
Weidmüller Interface GmbH Co. KG; Klingenbergstraße 16, 32758 Detmold-Germany Essential Health and Safety Requirements: Concerning ESRs this Schedule verifies compliance with the Annex III of ATEX directive only. By placing the product on the market, the of this manufacturer declares compliance with other relevant Directives, and all other safety related requirements including those of Annex II of this Directive.