User Documentation
Connecting and starting the web server | Starting the web server
7u-remote web server manual2112220000/06/01.2021
▶ Follow the rest of the steps in the installation routine until
the successful installation is confirmed.
The driver is displayed in the Device Manager under Network
adapters.
▶ Close the Device Manager.
4.2 Starting the web server
The u-remote station must be completely assembled and
supplied with voltage.
▶ Connect the PC to the coupler using a USB cable. The
USB socket at the coupler can be found behind the ser-
vice flap on the front side.
▶ Open one of the browsers listed in section3.2.
▶ In the address line, enter the IP address of the coupler
(default: 192.168.1.202, UR20-FBC-EIP: 192.168.5.202).
The web server is started. The connected station is displayed
with all of its active modules.
In the event that the web server will not start, please check
the IP address (see section11.2).
You can also open the web server via HTTPS (see
section5.8).