Quick Start Guide - u-create PROCON WEB for UC20-SL2000-AC Instructions for the first steps in creating visualizations for UC20 -SL2000-AC QSG0001 UC-S Create a simple u-create PROCON WEB project for UC20-SL2000
Fehler! Verweisquelle konnte nicht gefunden werden. Revision history Version Date Change log Author 01 2019-05 First released version W010843 02 2020-04 Minor corrections W010843 Contact Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 32758 Detmold, Germany T +49 5231 14-0 F +49 5231 14-292083 info@weidmueller.com www.weidmueller.com For further support please contact your local sales representative. Template: V2.1 – 2020-01 Fehler! Verweisquelle konnte nicht gefunden werden.
Fehler! Verweisquelle konnte nicht gefunden werden. Content 1. Warning and disclaimer....................................................................................................... 4 2. Abstract ............................................................................................................................... 5 3. Requirements ...................................................................................................................... 5 4. Install Visu Runtime Service ..
Fehler! Verweisquelle konnte nicht gefunden werden. 1. Warning and disclaimer Warning Controls may f ail in unsaf e operating conditions, causing uncontrolled operation of the controlled devices. Such hazardous events can result in death and / or serious injury and / or property damage. Theref ore, there must be provide saf ety equipment/ electrical saf ety design or other redundant saf ety f eatures that are independent f rom the automation system.
Fehler! Verweisquelle konnte nicht gefunden werden. 2. Abstract This quick start guide contains instructions how to install necessary software and how to create a u-create PROCON WEB project for UC20-SL2000-AC controllers including the process data access using the u-control driver. 3. Requirements To create a visualization project for UC20-SL2000-AC please install the latest versions of the necessary development tools u-create studio and u-create PROCON WEB. - u-create studio 01.
Fehler! Verweisquelle konnte nicht gefunden werden. 5. Create Target To create a target and to install it on your u-control you first need an empty micro SD card and insert it into your computer. Then follow the next steps: 1. Start u-create studio and create a new project or open an existing project 2. Find Project in your toolbar and click Create Target 3. Select destination path (the inserted SD card may need to be prepared for the process) 4. Select u-create_PROCON-WEB_RT_ES_6.4.0.
Fehler! Verweisquelle konnte nicht gefunden werden. 6. Symbol Configuration If you want to use process variables in your visualization you need to add a Symbol Configuration to your u-create studio application. Use checkboxes to select all variables you want to use in your visualization. After changing symbol configuration click Build → Generate code. This procedure creates a .xml file in your project directory which contains all symbol configuration information.
Fehler! Verweisquelle konnte nicht gefunden werden. 7. Create Visualization Start PROCON WEB Designer and create a new project and select target type IoT or open an existing project of this type. Select UControl driver from Driver Selection. Fehler! Verweisquelle konnte nicht gefunden werden.
Fehler! Verweisquelle konnte nicht gefunden werden. Click PLC Import and open the .XML file from u-create studio project directory and click Read symbols. Select variables you want to use in your visualization and click Import now to add them to your tag list. Now you can use the plc variables in your project. Fehler! Verweisquelle konnte nicht gefunden werden.
Fehler! Verweisquelle konnte nicht gefunden werden. 8. Download Visualization Runtime Last step is to download the visualization runtime to the u-control. First click Create to generate the runtime. Then select Target system by entering the IP address of your u-control. Click Go Online and enter user name admin and select your private key file for ssh access. Fehler! Verweisquelle konnte nicht gefunden werden.
Fehler! Verweisquelle konnte nicht gefunden werden. Click Project to transfer the visualization to the u-control. When the project transfer is completed you can open your visualization in your web browser by entering the IP address of the u-control and port number 16700. (example: 192.168.101.100:16700). Fehler! Verweisquelle konnte nicht gefunden werden.
