Approval/Certificate/Document of Conformity

IECEE OD-2020-F1:2017 © IEC 2017 Ed.1.0
TRF Template 2017-05-17
Testreport-249955-TL6-1.DOCX
VDE File No. 257500-1431-0044/249955
Test Report issued under the responsibility of:
TEST REPORT
IEC 61984
Connectors Safety requirements and tests
Report Number ............................... :
249955-TL6-1
Date of issue ................................... :
2018-06-27
Total number of pages .................. :
23
Name of Testing Laboratory
preparing the Report ................... :
VDE Prüf- und Zertifizierungsinstitut GmbH
VDE Testing and Certification Institute
Applicant's name ....................... :
Weidmüller Interface GmbH & Co. KG
Address ........................................... :
Klingenbergstraße 16; 32758 Detmold; Germany
Test specification:
Standard ......................................... :
IEC 61984:2008
Test procedure .......................... :
CB Scheme
Non-standard test method ............ :
N/A
Test Report Form No. .................... :
IEC61984C
Test Report Form(s) Originator .... :
VDE Pf- und Zertifizierungsinstitut GmbH
Master TRF ..................................... :
Dated 2017-06
Copyright © 2017 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment
and Components (IECEE System). All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from
the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.

Summary of content (23 pages)