Document of Conformity

Certificate: 70153051

Project: 70153051

Master Contract: 200039

Date Issued: 2017-09-27

DQD 507 Rev. 2016-02-18 Page 2

Notes:

1. Certified for use in other equipment where the acceptability of the combination is to be determined by

CSA Group or another NRTL.

2. Terminal blocks specified for Group Designation D shall be used only in or with industrial control

equipment where the load on any single circuit of the terminal block does not exceed 15 A at 51-150 V,

10 A at 151-300 V, 5 A at 301-600 V, or the max current rating, whichever is less.

3. The spacing, specified under construction details, shall be maintained between uninsulated live parts of

opposite polarity; and between and uninsulated live part and a grounded part including any mounting

surface or exposed metal part.

APPLICABLE REQUIREMENTS

CSA C22.2 No. 0 - 10 - General Requirements Canadian Electrical Code, Part II

CSA C22.2 No. 158 - 10 - Terminal Blocks