Approval/Certificate/Document of Conformity

Page 11 of 23 Report No. 250148-TL6-1
IEC 61984
TRF No. IEC61984C
Testreport-250148-TL6-1.DOCX
VDE File No. 257500-1431-0045/250148
B4
FINAL MEASUREMENTS (CONTACT RESISTANCE): IEC 60512 Test 2b
Test current ........................................................ :
1 A

R2  1,5 R1 or R2  5 m + R1 .................... :
See appended table B4.1
P
DIELECTRIC STRENGTH: IEC 60512 Test 4a
a) Impulse withstand voltage ............................. :
--

b) r.m.s. withstand voltage ................................. :
1,39kV

6.13
No breakdown or flashover occurred
See appended table B4.2
P
B5
BENDING (FLEXING) TEST (To be performed on new specimen)
7.3.10
Only non-rewirable connectors
Rated current ..................................................... :
A

Rated voltage ..................................................... :
V

Wire cross section .............................................. :
mm²

Load:  0,75 mm² / 20 N ;  0,75 mm² / 10 N
N

Numbers of bending ........................................... :

DURING THE TEST
No interruption of the test current
N/A
No short-circuit between the conductors
N/A
AFTER THE TEST
Cable support sleeve not loosened from the body
N/A
Insulation shows no signs of abrasion or of wear
and tear.
N/A
Broken strands do not pierce the insulation.
N/A
VISUAL EXAMINATION: IEC 60512 Test 1a
6.14.3
No damage occurs, which could impair normal use.
N/A