Product Change Notification

PCN-Change of Housing S2L-SMT-PL30-20200205-00-A

Seite 1

Change of housing geometry S2L-SMT

Dear Madam or Sir,

Please pass this product information on to your employees and, if needed, to your customers. All modifications are

performed for reasons of product improvements.

1. Technical change

S2L-SMT old geometry

S2L-SMT new geometry

2. Reason for change

S2L-SMT old geometry

S2L-SMT new geometry

3. Availability

Change of the housing geometry of all S2L-SMT flange versions.

Due to that change, it is now possible to use B2L and B2CF with lock and release levers as counterpart.

This was not possible with the old geometry, because of a collision of the levers with the S2L-SMT

housing.

This change has no negative influence on electrical data acc. to the data sheet.

The changed housing will be used in the production from first of September 2020.

There will be no stock cleaning.

PAGE 1
Product Change Notification PCN-Change of Housing S2L-SMT-PL30-20200205-00-A Seite 1 Change of housing geometry S2L-SMT Dear Madam or Sir, Please pass this product information on to your employees and, if needed, to your customers. All modifications are performed for reasons of product improvements. 1. Technical change Change of the housing geometry of all S2L-SMT flange versions. S2L-SMT old geometry S2L-SMT new geometry 2.
PAGE 2
Product Change Notification PCN-Change of Housing S2L-SMT-PL30-20200205-00-A Seite 2 4.