Brochure/Catalogue

Introduction

Card holders

Card holders are used for adapting Euro 19" format

(100 x 160 mm) cards to plug-in connectors acc. to

IEC603/DIN41612 and DIN41617.

Cardholders can be used in industrial applications when:

• Adapting several 19" cards: As well as saving on the cost

of a rack, accessibility is improved, because usually racks

are only accessible from behind.

• The PCB card is in a remote position, making it difcult to

install the cabling.

• It is necessary to extend legacy systems by adding more

electronic modules.

• There are processes where quick replacement of the

printed circuit and easy handling of connections is

important.

Card holders have the following individual components:

• Snap-t base and mechanism for securing the card

• Assembly plate and feet for direct assembly or for locking

on DIN rails

• Printed circuit board where the following features can

be identied:

– Plug-in connectors acc. IEC603/DIN41612 and

DIN41617

– Weidmüller terminals for screw connection

H.2 2690170000

Card holders