Complete the connection to your components Best protection with Klippon® cable gland systems Let’s connect.
1543550000
Content Klippon® Cable Glands 4 Klippon® Cable Glands – Introduction 6 10 15 18 21 Klippon® KDSU Cable Glands Klippon® KDSW Cable Glands Klippon® KDSX Cable Glands Klippon® KSG Cable Glands Klippon® KUB Cable Glands 24 26 28 35 35 35 36 41 1543550000 Klippon® KSPMH Stopping Plugs Klippon® KSPA Stopping Plugs Klippon® Cable Glands – Accessories Thread Data Ingress Protection Cable Gland Weight Data Selection Guide Klippon® Cable Glands General 3
Klippon® Cable Glands – Introduction Ex e, Ex d cable glands for armoured and un-armoured cable In addition to our existing assortment of cable glands we now launch a new Klippon® family of glands for armoured and un-armoured cables for use in Ex e (increased safety) and Ex d (flameproof) applications. Additionally there are Klippon® stopping plugs and accessories such as locknuts, IP washers, serrated washers, shrouds and earth tags available.
Klippon® Cable Glands – Introduction Overview cable glands and applications ATEX / IECEx certified cable glands and stopping plugs Cable Gland Type KDSU KDSW KDSX KUB KSG Stopping Plug KSPMH KSPA Outer Elastomeric Seal YES YES YES YES YES Inner Elastomeric Seal YES YES YES Compound NO Lead Option NO YES NO NO NO Armour Clamp Universal Steel wire Braided Universal No Certification IP Rating Page No.
Klippon® KDSU Cable Glands T Klippon® KDSU Cable Glands The KDSU type glands provide a universal armour clamp for steel wire, steel tape, screened or braided cables. An electrical bond between the cable armour and the gland is ensured. The gland can also be used to terminate unarmoured cables. In addition, the gland is fitted with two separate seals to seal the outer and inner cable insulation. When choosing the gland with a neoprene sealing a temperature range from –20 °C to +85 °C will be achieved.
Klippon® KDSU Cable Glands Structure of the part description Order key Example article description [Type] KDSU Meaning [Type] = Gland type (KDSU) [a] = Entry thread (M20-M75) [b] = Material (B = brass) [c] = Seal material (S = Silicone, N = Neoprene) [d] = Continuity for lead sheath (L = yes, O = no) [e] = Plating (SC = self-coloured, NI = Nickel) [f] = Cable outer sheath (1 = Reduced, 2 = Standard) [ggg] = Gland size (G16-G75) Refer to page 36 Selection Guide Klippon® Cable Glands to determine the suit
Klippon® KDSU Cable Glands – Ordering data Nickel-plated brass gland with neoprene sealing Order No.
Klippon® KDSU Cable Glands – Ordering data Nickel-plated brass gland with silicone sealing Order No.
Klippon® KDSW Cable Glands Klippon® KDSW Cable Glands T The KDSW glands provide an armour clamp for steel wire, steel tape and lead sheathed cables. An electrical bond between the cable armour and the gland is ensured. In addition, the gland is fitted with two separate sealings to seal the outer and inner cable insulation.
Klippon® KDSW Cable Glands Structure of the part description Order key Example article description [Type] KDSW Meaning [Type] = Gland type (KDSW) [a] = Entry thread (M20-M75) [b] = Material (B = brass) = Seal material (S = Silicone, N = Neoprene) [c] = Continuity for lead sheath (L = yes, O = no) [d] = Plating (SC = self-coloured, NI = Nickel) [e] = Cable outer sheath (1 = Reduced, 2 = Standard) [f] [ggg] = Gland size (G16-G75) Refer to page 36 Selection Guide Klippon® Cable Glands to determine the suit
Klippon® KDSW Cable Glands – Ordering data Nickel-plated brass gland with neoprene sealing Order No.
Klippon® KDSW Cable Glands – Ordering data Nickel-plated brass gland with neoprene sealing and lead sheathed armour Order No.
Klippon® KDSW Cable Glands – Ordering data Nickel-plated brass gland with silicone sealing Order No.
Klippon® KDSX Cable Glands T Klippon® KDSX Cable Glands The KDSX glands provide an armour clamp for braided cables. An electrical bond between the cable armour and the gland is ensured. In addition, the gland is fitted with two separate sealings to seal the outer and inner cable insulation. The gland maintains a temperature range from -60 °C to +180 °C. With both sealing materials an IP rating of IP 66 and IP 68 to 25 metres (30 min at 2,5 bar) is maintained.
Klippon® KDSX Cable Glands Structure of the part description Order key Example article description [Type] KDSX Meaning [Type] = Gland type (KDSX) [a] = Entry thread (M20-M75) [b] = Material (B = brass) [c] = Seal material (S = Silicone) [d] = Continuity for lead sheath (L = yes, O = no) [e] = Plating (SC = self-coloured, NI = Nickel) [f] = Cable outer sheath (1 = Reduced, 2 = Standard) [ggg] = Gland size (G16-G75) Refer to page 36 Selection Guide Klippon® Cable Glands to determine the suitable order num
Klippon® KDSX Cable Glands – Ordering data Nickel-plated brass gland with silicone sealing Order No.
Klippon® KSG Cable Glands Klippon® KSG Cable Glands T The KSG gland is designed to terminate un-armoured cables. When choosing the gland with a neoprene sealing a temperature range from –20 °C to +85 °C will be achieved, whereas the gland with silicone sealing ensures a temperature range from –60 °C to +180 °C. With both sealing materials an IP rating of IP66 and IP68 to 25 metres (30 min. at 2,5 bar) is maintained.
Klippon® KSG Cable Glands Structure of the part description Order key Example article description [Type] KSG Meaning [Type] = Gland type (KSG) [a] = Entry thread (M20-M90) [b] = Material (B = brass) [c] = Seal material (S = Silicone, N = Neoprene) [d] = Continuity for lead sheath (L = yes, O = no) [e] = Plating (SC = self-coloured, NI = Nickel) [f] = Cable outer sheath (2 = Standard) [ggg] = Gland size (G16-G90) Refer to page 36 Selection Guide Klippon® Cable Glands to determine the suitable order numbe
Klippon® KSG Cable Glands – Ordering data Nickel-plated brass gland with neoprene sealing Order No.
Klippon® KUB Cable Glands T Klippon® KUB Barrier glands The KUB gland provide an armour clamp for steel tape, steel wire and braided cables. An electrical bond between the cable armour and the gland is ensured. The gland can also be used to terminate unarmoured cables. Additionally, the gland provides a single pull resistant seal on the outer sheath of any cable.
Klippon® KUB Cable Glands Structure of the part description Order key Example article description [Type] KUB Meaning [Type] = Gland type (KUB) [a] = Entry thread (M20-M75) [b] = Material (B = brass) [c] = Seal material (S = Silicone) [d] = Continuity for lead sheath (L = yes, O = no) [e] = Plating (SC = self-coloured, NI = Nickel) [f] = Cable outer sheath (1 = Reduced, 2 = Standard) [ggg] = Gland size (G16-G75) Refer to page 36 Selection Guide Klippon® Cable Glands to determine the suitable order number
Klippon® KUB Cable Glands – Ordering data Nickel-plated brass gland with silicone sealing Order No.
Klippon® KSPMH Stopping Plugs Klippon® KSPMH Stopping Plugs T The KSPMH is a dome head stopping plug with an accessible hexagon recess. It is used for plugging threaded holes before the cable glands are installed. The KSPMH can be used within temperature ranges from –60 °C to +200 °C at an IP rating of IP 66 and IP 68. (100 m for 7 days). It is available in brass and stainless steel andis approved for Flameproof Ex d and Increased Safety Ex e applications.
Klippon® KSPMH Stopping Plugs Structure of the part description KSPM [Type] M16 [a] Meaning [a] [b] [e] Dimensions B [b] = = = SC [e] Entry thread (M16-M75) Material (B = brass), S = stainless steel Plating (SC = self coloured (natur)) Thread M16 M20 M25 M32 M40 M50 M63 M75 Hexagon socket 8.0 mm 10.0 mm 12.0 mm 12.0 mm 14.0 mm 17.0 mm 17.0 mm 19.0 mm Entry thread Length 16.0 mm 16.0 mm 16.0 mm 16.0 mm 16.0 mm 16.0 mm 16.0 mm 16.0 mm Max Length 21.5 mm 21.5 mm 21.5 mm 21.5 mm 21.5 mm 21.5 mm 21.
Klippon® KSPA Stopping Plugs Klippon® KSPA Stopping Plugs T The KSPA is a stopping plug with an accessible hexagon recess. It is used for plugging threaded holes before the cable glands are installed. The KSPA can be used within temperature ranges from –100 °C to +400 °C at an IP rating of IP 66. The KSPA is approved for the flameproof Enclosure Ex d and Ex e increased safety applications.
Klippon® KSPA Stopping Plugs Structure of the part description KSPA [Type] M16 [a] Meaning [a] [b] [e] Dimensions B [b] = = = SC [e] Entry thread (M16-M75) Material (B = brass) Plating (NI = Nickel) Thread M16 M20 M25 M32 M40 M50 M63 M75 Hexagon socket 8.0 mm 10.0 mm 12.0 mm 12.0 mm 14.0 mm 17.0 mm 17.0 mm 19.0 mm Länge 17.0 mm 17.0 mm 17.0 mm 17.0 mm 17.0 mm 17.0 mm 17.0 mm 17.0 mm Important Notes • All stopping plugs have a 1.5 mm pitch.
Klippon® Cable Glands – Accessories Overview Accessories Lock nuts are hexagonal discs, the internal thread have. The Allen allows turning preferably with a Ring, plug-in or open-end wrench for secure of Cable Glands. SKMU Locknuts – Brass – nickel-plated The locknuts are available in nickel-plated brass from M16 to M75. Technical Data Material Ordering data Brass, nickel-plated Order No.
Klippon® Cable Glands – Accessories SKMU Locknuts – Brass – EMC Serrated locknuts are specially equipped with six blades that ensure the locknut makes contact with the enclosure upon tightening. The locknuts are available in nickel plated brass from M16 to M63. Technical Data Material 1543550000 Ordering data Brass, nickel-plated Order No.
Klippon® Cable Glands – Accessories IP washers are used for the extensive sealing of wall mounted cable glands to maintain the ingress protection of the gland. They are installed between the enclosure and the connection thread of a gland and are available in polyethylene, neoprene, fibreglass and nylon. Klippon® KSWN IP washer – Nylon Technical Data Material Temperature range Colour Ordering data Nylon 6 -40 °C to +140 °C Red Order No.
Klippon® Cable Glands – Accessories GWDR IP washer - Polyethylene Technical Data Material Temperature range Farbe Ordering data Polyethylene -30 °C to +90 °C Transparent Order No. 1777930000 1777940000 1777950000 1777960000 1777970000 1777980000 1777990000 Description GWDR M16-PO GWDR M20-PO GWDR M25-PO GWDR M32-PO GWDR M40-PO GWDR M50-PO GWDR M63-PO [a] M16 M20 M25 M32 M40 M50 M63 Qty.
Klippon® Cable Glands – Accessories SZS serrated washers The serrated washers can be used as fastening protection for cable glands in combination with locknuts. These are available in stainless steel 1.4401 (316) material. Technical Data Material 32 Ordering data Stainless steel 1.4401 (316) Order No.
Klippon® Cable Glands – Accessories Klippon® KSP Shrouds The KSP shrouds protect the gland against environmental conditions as for example dusts before and after the installation. Klippon® KSP – PVC Technical Data Material Colour Temperature range Hardness [Shore A] Ordering data PVC Black -25 °C to +70 °C 65 Order No.
Klippon® Cable Glands – Accessories Earth tags Earth tags provide the possibility to connect safely the cable gland with the earthing conductor. Earth tags – Brass – nickel-plated The earth tags are available in nickel plated brass and from M16 to M75. Technical Data Material Ordering data Brass, nickel-plated Order No.
Klippon® Cable Glands Threaddaten / Ingress Protection / Gland weight data Threaddaten Metric thread chart Thread Typ ISO METRIC (IEC 60423 1993) Thread Size Outer Diameter Pitch M16 M20 M25 M32 M40 M50 M63 M75 M85 M90 16 x 1.5 20 x 1.5 25 x 1.5 32 x 1.5 40 x 1.5 50 x 1.5 63 x 1.5 75 x 1.5 85 x 1.5 90 x 1.5 15.97 19.97 24.97 31.97 39.97 49.97 62.97 74.97 84.97 89.97 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 Dimensions in mm Thread Length 16.0 16.0 16.0 16.0 16.0 16.0 19.0 19.0 25.0 25.
Selection Guide Klippon® Cable Glands Selection Guide Klippon® Cable Glands Purpose: Generation of the article description By selecting the suitable cable gland different factors have to be considered, such as • the environment of the application • the conditions inside the enclosure • the construction of the cable By using the Selection Guide Klippon® Cable Glands the article description will be generated following the step by step process to create the 7 character order key.
Selection Guide Klippon® Cable Glands 1.
Selection Guide Klippon® Cable Glands 1b) Selection of the cable gland type in regard to the continuity for lead sheath [Type] KDSU KDSW KDSX KSG KUB Continuity for lead sheath No Yes No No No [d] O L/O O O O In the example case a cable without lead sheath is to be terminated, therefore the option to clamp a lead sheathed cable is not needed. Consequently is [d] = O All four gland types marked in blue can be used.
Selection Guide Klippon® Cable Glands 2. Selection of the material [b], the sealing material [c] and the plating [e] of the cable gland Order key Example Article Description [Type] KDSU [a] [b] [c] [d] O [e] [f] [ggg] 2a) Selection of the material [b] All cable gland types are made from brass “b”. Other materials can also be provided upon request.
Selection Guide Klippon® Cable Glands In the example case the following diameters are given: Cable Outer Sheath: 10 mm (By looking into the below shown dimensions chart of the KDSU the orange marked clamping ranges (Cable Outer Sheath [D]) can be selected). Cable Inner Sheath: 8 mm (By looking into the below shown dimensions chart of the KDSU the orange marked clamping ranges (Cable Inner Sheath [C]) can be selected).
General General Health & Safety When Weidmüller cable glands and the accessories are used and installed as prescribed within the data sheet provided, they will not cause any danger or hazard to the health or safety of persons, animals or property. The products should be installed by suitably trained/skilled personnel and in full accordance with the relevant legislative regulations and the accepted code of practice for the industry concerned.
Notes 42 1543550000
Notes 1543550000 43
Addresses worldwide Let’s connect. AE United Arab Emirates BR Weidmuller Middle East FZE Warehouse Q3-79 SAIF-Zone P.O. BOX 8591 Sharjah Tel. +971 65572723 Fax +971 65572724 wme.info@weidmueller.com AO Angola Please contact Phambili Interface South Africa AR Argentina CPI SA Bauness 2660 C1431DOF Buenos Aires Tel. +54 11 4523 8008 Fax +54 11 4522 0546 info@cpi.com.ar www.cpi.com.ar AT AU AZ BA Austria Weidmüller GmbH IZ NOE Süd Straße 2b, Obj M 59 2355 Wiener Neudorf Tel.
You can find all Weidmüller addresses and your local contact on the internet at: www. weidmueller.com/countries Sales company Representation abroad without representation abroad Let’s connect. MD ME MG MK Moldova BERHORD A & D srl 79/1, str. Milescu Spartaru MD-2075 Chisinau Moldova Tel. +373 (22) 815002 Fax +373 (22) 815007 atiuleanu@berhord.com www.ad.berhord.com Montenegro Please contact our Representative Office Weidmüller Interface GmbH & Co. KG Serbia.
We cannot guarantee that there are no mistakes in the publications or software provided by us to the customer for the purpose of making orders. We try our best to quickly correct errors in our printed media. All orders are based on our general terms of delivery, which can be reviewed on the websites of our group companies where you place your order. On demand we can also send the general terms of delivery to you.
1543550000 47
Weidmüller – Your partner in Industrial Connectivity As experienced experts we support our customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. We are at home in their industries and markets and know the technological challenges of tomorrow. We are therefore continuously developing innovative, sustainable and useful solutions for their individual needs. Together we set standards in Industrial Connectivity.
