Brochure/Catalogue

46 2452970000
Klippon
®
TB QL 262620 Depth 200 mm
Height/Width/Depth 260 / 260 / 200 mm
201
183
Ø 11
55.5
189 207
214
250
286 / 316*
260
A
170 260
15
B
C
D
View without cover,
seal and lock
M10 internal/external
ground connection
M6 internal ground
connection
131 167
177
200
204 168
167
131
126.5
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom 1199960000
2 gland plates - top and bottom sides (A & B) 1199970000
3 gland plates - bottom, left and right sides (B, C & D) 1199980000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1199990000
Note
Painted sheet steel enclosure available on request. Standard colour is similar to RAL7035.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 2x35 2x34
4 mm² 1x30 1x29
6 mm² 1x22 1x22
10 mm² 1x18 1x17
16 mm² 1x15 1x14
35 mm²
Note
*For enclosure versions with zero, one or two gland plates, the horizontal gap between the
mounting feet is reduced by 30mm.
Assembly with terminal blocks provides for 10mm clearance to the ends of the mounting rail.
Recommended order:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Mirror-polish Stainless steel 1.4301 rain hood (2R)
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1193950000
1193820000
1257660000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256320000
1256330000
1253230000
1281380000
1279320000
1283450000
1257640000
1252780000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 33 25
M16 22 16
M20 14 11
M25 12 9
M32 6 4
M40 5 4
M50 2 2
M63 2 1
M75 1 1
Note
Our IP68 brass cable glands serve as a reference for these recommended values.
Dimensions of mounting plate
199.00
183.00
189.00
Ø 7
205.00
Klippon
®
TB QL - Quarter Lock