Brochure/Catalogue

412452970000
Klippon
®
TB MH 987420 Depth 200 mm
Height/Width/Depth 980 / 740 / 200 mm
167
131
Ø 11
126.5
450 414
317
353
766/796*
740
A
625 980
15
200
681
650
177
896 927
15
F
B
E
C
D
131 167
View without cover,
seal and screw
M10 internal/external
ground connection
M6 internal ground
connection
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1195610000
2 gland plates - top and bottom sides (A & B) 1195620000
3 gland plates - bottom, left and right sides (B, C & D) 1195630000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1195640000
Note
Painted sheet steel enclosure available on request. Standard colour is similar to RAL7035.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 6x174 9x127
4 mm² 6x146 8x106
6 mm² 5x110 7x80
10 mm² 4x88 6x64
16 mm² 4x74 5x54
35 mm² 3x55 4x40
Note
*For enclosure versions with zero, one or two gland plates, the horizontal gap between the
mounting feet is reduced by 30mm.
Assembly with terminal blocks provides for 10mm clearance to the ends of the mounting rail.
Recommended order:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Mirror-polish Stainless steel 1.4301 rain hood (2R)
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Padlock with two keys
Stainless steel 1.4301
Order No.
1194050000
1193920000
1257770000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256750000
1256760000
1253230000
1281580000
1279320000
1283450000
1257640000
1252780000
1252750000
1252730000
1252190000
1285200000
1192690000
0905680000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 96 126
M16 64 84
M20 42 54
M25 36 48
M32 20 26
M40 16 22
M50 6 10
M63 6 8
M75 4 6
Note
Our IP68 brass cable glands serve as a reference for these recommended values.
Dimensions of mounting plate
680.00
650.00
Ø 7
896.00
926.00
Klippon
®
TB MH - Multi Hinge