Brochure/Catalogue

44 2452970000
Klippon
®
TB QL 221513 Depth 133 mm
Height/Width/Depth 229 / 152 / 133 mm
100
64
Ø 11
55.5
177 147
116
146
178/208*
152
A
152 229
15
133
110
F
B
E
C
D
55
158 176
93
75
15
64
100
M10 internal/external
ground connection
M6 internal ground
connection
View without cover,
seal and lock
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom 1199860000
2 gland plates - top and bottom sides (A & B) 1199870000
3 gland plates - bottom, left and right sides (B, C & D) 1199880000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1199890000
Note
Painted sheet steel enclosure available on request. Standard colour is similar to RAL7035.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 1x29 1x15
4 mm² 1x13
6 mm² 1x9
10 mm² 1x7
16 mm² 1x6
35 mm²
Note
*For enclosure versions with zero, one or two gland plates, the horizontal gap between the
mounting feet is reduced by 30mm.
Assembly with terminal blocks provides for 10mm clearance to the ends of the mounting rail.
Recommended order:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Mirror-polish Stainless steel 1.4301 rain hood (2R)
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1193930000
1193810000
1257650000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256270000
1256280000
1253230000
1281360000
1279320000
1283450000
1257640000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 6 8
M16 5 6
M20 2 3
M25 2 2
M32 1 2
M40 1 2
M50 0 0
M63 0 0
M75 0 0
Note
Our IP68 brass cable glands serve as a reference for these recommended values.
Dimensions of mounting plate
91.00
75.00
158.00
174.00
Ø 7
Klippon
®
TB QL - Quarter Lock