Brochure/Catalogue

732452970000
Klippon
®
TB FS 303020 Depth 200 mm
Height/Width/Depth 306 / 306 / 200 mm
View without cover,
seal and screw
Ø 11
M10 internal/external
ground connection
M6 internal ground
connection
276
229
15
B
C
D
306
306
235 276
203 311
131 167
200
15
296
260
250 214
126.5
167
131
332/362*
311
A
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1195860000
2 gland plates - top and bottom sides (A & B) 1195870000
3 gland plates - bottom, left and right sides (B, C & D) 1195880000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1195890000
Note
Painted sheet steel enclosure available on request. The colours of painted enclosures may vary
under certain circumstances.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 2x44 2x43
4 mm² 2x37 2x36
6 mm² 2x28 2x27
10 mm² 1x22 1x22
16 mm² 1x19 1x18
35 mm² 1x14 1x13
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance between the
mounting feet is reduced by 30mm.
The assembly with modular terminals gives consideration to a distance of 10mm from the end
of each mounting rail.
Order recommendations:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1193960000
1193830000
1257670000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256360000
1256370000
1253230000
1279320000
1283450000
1257640000
1252780000
1252750000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 40 33
M16 26 22
M20 17 14
M25 14 12
M32 8 6
M40 6 5
M50 3 2
M63 2 2
M75 2 1
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
245.00
229.00
235.00
Ø 7
251.00
Klippon
®
TB FS - Fixing Screw