Brochure/Catalogue

272452970000
Klippon
®
TB MH 403015 Depth 150 mm
Height/Width/Depth 400 / 300 / 150 mm
117
81
15
264
326/356
300
294
81
117
400 348 318 247
150
127
15
64
241
223
329 347
View without cover,
seal and screw
M10 internal/external
ground connection
M6 internal ground
connection
Ø11
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1194910000
2 gland plates - top and bottom sides (A & B) 1194920000
3 gland plates - bottom, left and right sides (B, C & D) 1194930000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1194940000
Note
Painted sheet steel enclosure available on request. Standard colour is similar to RAL7035.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 2x62 3x42
4 mm² 2x52 3x35
6 mm² 1x39 2x26
10 mm² 1x32 2x21
16 mm² 1x26 2x18
35 mm² 1x20 1x13
Note
*For enclosure versions with zero, one or two gland plates, the horizontal gap between the
mounting feet is reduced by 30mm.
Assembly with terminal blocks provides for 10mm clearance to the ends of the mounting rail.
Recommended order:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Mirror-polish Stainless steel 1.4301 rain hood (2R)
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Padlock with two keys
Stainless steel 1.4301
Order No.
1193980000
1193850000
1257690000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256430000
1256440000
1253230000
1281430000
1279320000
1283450000
1257640000
1252780000
1252190000
1285200000
1192690000
0905680000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 23 29
M16 13 16
M20 11 13
M25 5 6
M32 4 5
M40 3 4
M50 3 3
M63 0 0
M75 0 0
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
239.00
223.00
329.00
345.00
Ø 7
Klippon
®
TB MH - Multi Hinge