Brochure/Catalogue

812452970000
Klippon
®
TB FS 484820 Depth 200 mm
Height/Width/Depth 480 / 480 / 200 mm
View without cover,
seal and screw
Ø 11
200
15
424 368
126.5
434
470
131 167
167
131
M10 internal/external
ground connection
M6 internal ground
connection
15
B
C
D
327 485
506/536*
485
A
409 450
480
450
403
480
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1196260000
2 gland plates - top and bottom sides (A & B) 1196270000
3 gland plates - bottom, left and right sides (B, C & D) 1196280000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1196290000
Note
Painted sheet steel enclosure available on request. The colours of painted enclosures may vary
under certain circumstances.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 4x78 4x77
4 mm² 3x65 3x64
6 mm² 3x49 3x48
10 mm² 2x39 3x39
16 mm² 2x33 2x32
35 mm² 1x25 2x24
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance between the
mounting feet is reduced by 30mm.
The assembly with modular terminals gives consideration to a distance of 10mm from the end
of each mounting rail.
Order recommendations:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1194000000
1193870000
1257710000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256550000
1256560000
1253230000
1279320000
1283450000
1257640000
1252780000
1252750000
1252730000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 65 60
M16 44 40
M20 29 26
M25 24 21
M32 13 12
M40 11 10
M50 5 4
M63 4 4
M75 3 3
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
419.00
403.00
409.00
Ø 7
425.00
Klippon
®
TB FS - Fixing Screw