Brochure/Catalogue

752452970000
Klippon
®
TB FS 352620 Depth 200 mm
Height/Width/Depth 350 / 260 / 200 mm
View without cover,
seal and screw
Ø 11
M10 internal/external
ground connection
M6 internal ground
connection
230
183
15
B
C
D
350
260
279 320
250 355
286/316*
265
A
131 167
200
15
214
250
294 258
126.5
167
131
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1195960000
2 gland plates - top and bottom sides (A & B) 1195970000
3 gland plates - bottom, left and right sides (B, C & D) 1195980000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1195990000
Note
Painted sheet steel enclosure available on request. The colours of painted enclosures may vary
under certain circumstances.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 2x53 2x34
4 mm² 1x44 2x29
6 mm² 1x33 2x22
10 mm² 1x27 2x17
16 mm² 1x22 1x14
35 mm² 1x15 1x11
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance between the
mounting feet is reduced by 30mm.
The assembly with modular terminals gives consideration to a distance of 10mm from the end
of each mounting rail.
Order recommendations:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1193970000
1193840000
1257680000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256410000
1256420000
1253230000
1279320000
1283450000
1257640000
1252780000
1252750000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 33 38
M16 22 26
M20 14 17
M25 12 14
M32 6 7
M40 5 6
M50 2 3
M63 2 2
M75 1 2
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
199.00
183.00
279.00
295.00
Ø 7
Klippon
®
TB FS - Fixing Screw