Approval/Certificate/Document of Conformity

2/24/2020
1/2
Government of India
Ministry of Commerce & Industry
Petroleum & Explosives Safety Organisation (PESO)
5th Floor, A-Block, CGO Complex, Seminary Hills,
Nagpur - 440006
E-mail : [e-mail]
Phone/Fax No : 0712 -2510248, Fax-2510577
Approval No : A/P/HQ/KA/104/5757 (P461058) Dated : 21/02/2020
To,
M/s. Weidmuller Interface GmbH & Co,
Klingenbergstrabe 16 32758 Detmold,detmold
32758
GERMANY
Sub : Approval of Increased Safety Type Electrical Equip under Petroleum Rules 2002- Regarding.
Sir(s),
Please refer to your letter No. NIL dated 28/01/2020 on the subject.
The following Ex electrical equipment(s) manufactured by you according to IEC 60079-0 : 2011, IEC 60079-
31 : 2013, IEC 60079-7 : 2015, standards and covered under IBExU GmbH Test reports mentioned below
is/are approved for use in Zone 2 of Gas IIC hazardous areas coming under the the Petroleum Rules, 2002
administered by this Organization.
Sr.
No
Description
Safety
Protection
Equipment
reference
Number
Test Agency
Drawing
no
Name
Certificate
No.
Certificate
Date
1
Empty
Enclosure Type
Klippon TB
FS(KTB FS),TB
MH(KTB
MH),TB
QL(KTBQL)
Ex eb IIC
Gb
P461058/1
IBExU
GmbH
IECEx IBE
14.0004U
22/12/2016
as per
test
report
This Approval is granted subject to observance of the following conditions:-
1)The design and construction of the equipment shall be strictly in accordance with description, condition and
drawings as mentioned in the IBExU GmbH Test Reports referred to above.
2)The equipment shall be used only with approved type of accessories and associated apparatus.
3)Each equipment shall be marked either by raised lettering cast integrally or by plate
attached permanently to the main structure to indicate conspicuously:-
(a) Name of the manufacturer
(b) Name and number by which the equipment is identified.
(c) Number & date of the test report of the IBExU GmbH applicable to the equipment.
(d) Equipment reference number of this letter by which use of apparatus is approved.
(e) Protection level.
4) A certificate to the effect that the equipment has been manufactured strictly in accordance with the drawing
referred to in the IBExU GmbH Test report and is identical with the one tested and certified at IBExU GmbH shall
be furnished with each equipment.
5) The customer shall be supplied with a copy of this letter, an extract of the conditions and maintenence
schedule, if any, recommended by IBExU GmbH in their test reports and copy of instructions booklet detailing