User Documentation

- 5 -
Mounting Dimensions (unit = mm)
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back panel of the
wireless device when you take it out of the box. If you need to reattach the DIN-Rail
attachment plate to the device, make sure the stiff metal spring is situated towards
the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the slot
just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will snap
into place as shown below.
To remove the IE-WL-AP-BR-CL-ABG from the DIN-Rail, simply reverse Steps 1
and 2.