User Documentation
Page 61
Register (Assign) the Router to the defined
Router object configured in the u-link Web
portal (Step 11)
▪ For the registration process we need the
unique activation code of the Router object.
The activation code can be found in the
properties of the created Router object (u-link
Portal: Menu ‘Device Management’).
➢ Select Tab ‘Registration’.
➢ Enter the activation code of the defined Router
object in field ‘Registration code’.
➢ Click button ‘Register’.
▪ Now the Router is initiating the registration
process to the u-link Portal server. This
process typically takes time of around 30
seconds.
➢ Please click button “Reload” repeatedly to
update the current registration status.
Screenshot u-link Web portal (Menu Device Management)
4.6 Configuration of the Router
Chapter 4 – Setup of a remote access scenario (Configuration Router)
Screenshots Router Web interface
(Menu u-link / Tab Registration)
1: Not registered (but registration code
already entered)
2: Ongoing registration process (after
clicking button “Register”)
3: Successful registration
Successful registration
ongoing registration process
As result the Router should have the
status “registered”.
If the registration process has failed
please refer to Appendix A (Registration
of Router to u-link failed).
Copyright © 2020 Weidmüller Interface GmbH & Co. / All rights reserved. Reproduction without permission is prohibited.V1.5.1 / Oct, 2020