User Documentation

149
Devices – Energy Analyser 550
2008050000/03/02-2018
INFOBEREICH
Die Angabe „MatNr/Version/Datum“ bzw. „1234560000/00/MM.YY“ ist als Textvariable deniert
und kann nur auf der „Rueckseite“ editiert werden. Die Textvariable erscheint in allen Doku-
menten dieses Buches, sobald eine Synchronisierung des gesamten Buches(!) durchgeführt
wird. ACHTUNG Die „Rueckseite” muss als Formatquelle(!) ausgewählt sein!
2. Set the desired IP address, IP screen and IP gateway.
Put the Energy Analyser 550 into parameterisation mode as explained in the operating manual and set the
Ethernet address under Communication.
Ethernet: Ports
Devices equipped with the Ethernet option can use the following ports:
• UDP
• TFTP 1201
• Modbus/TCP 502
• DHCP 68
• NTP 123
• BaCnet 47808
• Nameservice 1200
• TCP
• HTTP 80 (can be edited in the ini.jas)
• FTP command port 21, (data port 1024,
• 1025, 1026, 1027)
• Modbus/TCP 502 (4 ports)
• Modbus RTU via Ethernet 8000 (1 port)
4.4.4.2 Probus
Probusproles
AProbusprolecontainsthedatatobeexchangedbetweenanEnergyMeterandaPLC.AProbusprole
can:
• Retrieve measurement values from the Energy Meter,
• Set the digital outputs in the Energy Meter and
• Query the status of the digital inputs in the Energy Meter.
EachProbusprolecanholdamaximumof127bytesofdata.Ifmoredatahastobetransferred,simply
createadditionalProbusproles.
• EveryProbusprolehasaprolenumber.TheprolenumberissentbythePLCtotheEnergyMeter.
• UsingecoExplorergo,16Probusproles(prolenumbers0...15)canbeedited.
• AdditionalProbusproles(prolenumbers16...255)canbecreatedusingJasicprograms.
• FourProbusprolesarepreconguredexworks.