Document of Conformity

Page 11 of 28 Report No.: 2198607.50

IEC 61984

Clause Requirement + Test Result - Remark Verdict

R2  1,5 R1 or R2  5 m + R1...................:

See appended table B4.1 P

DIELECTRIC STRENGTH: IEC 60512 Test 4a

a) Impulse withstand voltage ............................: 4,8 kV



b) r.m.s. withstand voltage ................................: 2,21 kV



6.13 No breakdown or flashover occurred See appended table B4.2 P

B5 BENDING (FLEXING) TEST (To be performed on new specimen) N/A

7.3.10 Only non-rewirable connectors

Rated current ...................................................: A



Rated voltage ...................................................: V



Wire cross section ............................................: mm²



Load:  0,75 mm² / 20 N ;  0,75 mm² / 10 N



Numbers of bending .........................................:



DURING THE TEST

No interruption of the test current N/A

No short-circuit between the conductors N/A

AFTER THE TEST

Cable support sleeve not loosened from the body N/A

Insulation shows no signs of abrasion or of wear and

tear.

N/A

Broken strands do not pierce the insulation. N/A

VISUAL EXAMINATION: IEC 60512 Test 1a

6.14.3 No damage occurs, which could impair normal use. N/A