Approval/Certificate/Document of Conformity

Page 22 of 28 Report No.: 2198607.50
IEC 61984
Clause Requirement + Test Result - Remark Verdict
0.1
TABLE: Characteristic features
Rated voltage(s)....................... : 250 V~, 320 V~, 400 V~
Rated current .......................... :
BLZP 5.08HC series
(female part)
min. no. of poles (Ta = 20°C) 17,5 A
max. no. of poles (Ta = 20°C) 14 A
min. no. of poles (Ta = 40°C) 14 A
max. no. of poles (Ta = 40°C) 12 A
SL 5.08HC series
(male part)
min. no. of poles (Ta = 20°C) 24 A
max. no. of poles (Ta = 20°C) 19 A
min. no. of poles (Ta = 40°C) 21 A
max. no. of poles (Ta = 40°C) 16,5 A
Rated impulse voltage(s) ......... : 4000 V
Rated insulation voltage(s) ...... : 250 V, 320 V, 400 V
Number of poles ...................... : 2-24
Protection degree (IP-Code) .... : IP 20
Mounting ................................. : PCB and free connector
Wire cross section area or cross
section range ........................... :
0,2-4mm² (4mm² only for rigid solid conductor )
Material and coating of female
contact .................................... :
Cu-Leg
4-8 μm Sn hot-dip tinned
Material and coating of male contact: Cu-Leg
1-3 μm Ni / 2-4 μm Sn matt
0.2
TABLE: Clearance and creepage distance measurements (mated specimen)
Type / Shell-size / etc. ............. :
Contact -
Contact
Contact -
Contact
Contact -
Contact
Rated voltage [V] .................... : 250 320 400
Pollution degree ...................... : 3 2 2
Isolation material group ........... : IIIa IIIa IIIa
Impulse withstand voltage [kV] : 4 4 4
Test voltage [kV] ..................... : 4,923 4,923 4,923
Clearances required ................ : 3,0 3,0 3,0
Clearances measured ............. : 4,1 4,1 4,1
Creepage distances required .. : 4,0 3,2 4,0
Creepage distances measured : 4,1 4,1 4,1
Supplementary information: