User Documentation

Assembly instructions
PUSH IN connector with push-button –
BLF 7.62HP
OMNIMATE Power – series BLF 7.62HP
All other technical data can be obtained from the data sheet.
Cables suitable for connection:
Strip the insulation from the cables to a length of approx. 10 mm ± 1 mm. If you are using wire-end ferrule with plastic collars,
strip the cables according to the table below.
min.
cable connection cross-section
max.
cable connection cross-section
Solid (H05(07) V-U) 0,5 mm² 1,5 mm²
Flexible (H05(07) V-K) 0,5 mm² 2,5 mm²
with wire-end ferrule according to DIN 46 228/1 0,5 mm² 2,5 mm²
with wire-end ferrule; with collar DIN 46 228/4 0,5 mm² 2,5 mm²
AWG 20 12
We recommend using the following wire-end ferrules with plastic collar:
Cable diameter Type
Weidmüller color code
Order number
DIN color code
Order number
Stripping length
0.5 mm² H0,5/16 9025870000 9019020000 12 ± 1 mm
0.75 mm² H0,75/16 9025860000 9019050000 12 ± 1 mm
1 mm² H1,0/16 9025950000 9019100000 12 ± 1 mm
1.5 mm² H1,5/16 0635100000 9019130000 12 ± 1 mm
4 mm² H4,0/17 9019190000 9019190000 12 ± 1 mm
We recommend using the following wire-end ferrules without plastic collar:
Cable diameter Type Order number Stripping length
0.5 mm² H0,5/10 9004050000 10 ± 1 mm
0.75 mm² H0,75/10 0542500000 10 ± 1 mm
1 mm² H1,0/10 0282800000 10 ± 1 mm
1.5 mm² H1,5/10 0186500000 10 ± 1 mm
2.5 mm² H2,5/10 9004080000 10 ± 1 mm
6 mm² H6,0/10 90041200000 10 ± 1 mm
We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact