Approval/Certificate/Document of Conformity

Date of certification: 25 March 2019
DEKRA Certification B.V.
?
R.Schuller,
Certification Manager Page 1/3
©
Integral publication of this certificate and adjoining reports is allowed. This Certificate may only be reproduced
in its entirety and without any change.
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T [phone] F [phone] www.dekra-certification.com Registered Arnhem 09085396
CERTIFICATE
(1)
EU-Type Examination
(2)
Equipment or protective systems intended for use in
potentially explosive atmospheres - Directive
2014/34/EU
(3) EU-Type Examination Certificate Number: KEMA 09ATEX0168 X Issue Number: 4
(4) Product: NAMUR Pulse Isolator, Type ACT20X-.HDI-.SDO-...-S
Type ACT20X-.HDI-.SDO-…-P
(5) Manufacturer: Weidmuller Interface GmbH
(6) Address: Klingenbergstrasse 16, 32758 Detmold, Germany
(7) This product and any acceptable variation thereto is specified in the schedule to this certificate and the documents
therein referred to.
(8) DEKRA Certification B.V., Notified Body number 0344 in accordance with Article 17 of Directive 2014/34/EU of the
European Parliament and of the Council, dated 26 February 2014, certifies that this product has been found to
comply with the Essential Health and Safety Requirements relating to the design and construction of products
intended for use in potentially explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential test report number NL/KEM/ExTR09.0087.03.
(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0 : 2012 + A11 : 2013 EN 60079-11 : 2012 EN 60079-15: 2010
except in respect of those requirements listed at item 18 of the Schedule.
(10) If the sign ”X” is placed after the certificate number, it indicates that the product is subject to the Specific Conditions
of Use specified in the schedule to this certificate.
(11) This EU-Type Examination Certificate relates only to the design and construction of the specified product. Further
requirements of the Directive apply to the manufacturing process and supply of this product. These are not covered
by this certificate.
(12) The marking of the product shall include the following:
II (1) G [Ex ia Ga] IIC/IIB/IIA
II (1) D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I