Brochure/Catalogue
K
K.4 2729490000
CBX200
• Interface converter for configuration, with galvanic
isolation
• USB port for connecting to PC
• TX and RX status displays
• WI-Manager and TTA Set configuration software
programs, download at www.weidmueller.com
Technical data
Input
Type
Input current
Input resistance
Input voltage
Output
Type
Output voltage
Output current
Level on interfaces
Baud rate
Activation signal
Insulation coordination
Insulation voltage
Note
Ordering data
Note
Accessories
Note
CBX200 USB
USB 2.0 (USB type A plug)
≤ 100 mA
22 kΩ
1.6…5.6 V
RS232 (4-pole 2.5-mm jack plug)
3.3 V regulated
3 A
1.8…5.6 V (automatically adapted)
≤ 115 kBd
9…15 V typ. 12 V / 4 mA
2.5 kV (input / output)
Type Qty. Order No.
CBX200 USB 1 8978580000
Ta
ble for selecting a configuration adapter
Pin assignment
s for jack plug
Product CBX100 CBX200
ACT20X X
WAVE TTA X X
ITX+ X
DTR* Vcc
0 3,3 V
1 0 V
The CB
X200 USB is a USB2.0/RS232-interface converter with
galvanic isolation. It has additional functionality
for controlling
and supplying the connect
ed RS232 device. The CBX200 USB makes
it possible
to configure the intrinsically safe ACT20X product line and
the WA
VE TTA signal converter.
The CB
X200 USB is not compatible with the CBX100 USB.
Ins
tallation notes
The power supply
to the device comes from the USB port
via a USB type-A plug. The output-side of the RS232 in
terface
uses a
four-pole 2.5-mm jack plug to connect. This jack plug
is also capable of activating the RS232 in
terface when needed
with a 12-V contr
ol voltage. With the assistance of the DTM,
the USB in
terface is diverted to a COM interface. The RS232
in
terface can be activated with an RTS signal
(R
TS = 1➝ output activated) via the diverted COM interface.
The jack plug is also capable of supplying the RS232 node
with a
regulated voltage of 3.3 V at 4 mA current.
The
DTR signal (DTR = 0 ➝ supply activated) is used for control.
It is also possible
to query the status using the DSR signal
(DSR = 0 ➝ output activat
ed).
The "WI-Manager" softwa
re, the "TTA Set" and the
DT
M library can all be downloaded free of charge from
www.weidmueller
.com.
GND RxD TxD
Vcc/control input
Control input RTS* RS232 interface
12 V 1 active
12 V 0 active
0 V 1 active
0 V 0 not active
*
RTS and DTR are internal control signals
Accessories
USB configuration adapter