WE-BTWF 产品说明书 User Manual (仅供内部使用) WeCo SRL Viale Kennedy 113-121 Scarperia e San Piero Firenze,Italy 1
修订记录: Revision record: 版本号 修订人 修订日期 Version No. Reviser Date V0.1 巫木军 2021-10-13 Mujun Wu V0.2 巫木军 修订描述 Description 初始版本 Initial version 2022-02-10 更新模块尺寸和安装图 The module size and installation drawing Mujun Wu are revised V0.
目录 Table of contents 一、 产品概述 Production description............................................................................... 4 二、 产品特性 Product features......................................................................................... 4 三、 产品应用 Product application.....................................................................................4 四、 技术参数 Technical data.............................................................................................
一、 产品概述 Product description WE-BTWF 是基于家庭储能电池的应用需求,自主设计开发的一款无线 WIFI 和蓝牙模块 产品;具备串口通信、无线蓝牙通信、无线 WIFI 通信、支持云平台接入和手机 APP 连接 访问等功能;产品广泛适用于家庭储能、工商业储能、工业动力等 IOT 应用。 We-BTWF is a wireless WIFI and Bluetooth module product independently designed and developed based on the application requirements of home energy storage batteries. It’s with functions of serial communication, wireless Bluetooth communication, wireless WIFI communication, cloud platform access and mobile APP connection & access.
四、 技术参数 Technical data 产品型号 Model WE-BTWF 模块 WE-BTWF Module WE-BTWF 盒子 WE-BTWF box 外形尺寸(长 x 宽 x 高) Size (LxWxH) 75 x 54 x 17mm 92 x 68 x 28mm 电源规格 Power specification 额定电压 Rated voltage 12V 工作电压范围 Working voltage range 5V~15V 工作电流 Working current 5V 时,平均<100mA When it’s 5V, <100mA in average 12V 时,平均<50mA When it’s 12V, <50mA in average 供电电流 Power supply current 5V 时,最小为300mA 12V 时,最小为120mA 指示灯 Indicator 绿灯:电源指示灯 When it’s 5V, min.300mA When it’s 12V, min.
支持波特率 Supported baud rate 9600,115200bps 通信协议 Communication protocol MODBUS 隔离类型 Isolation type Non-Isolated 通信接口 Communication interface A2502-WV04, stitch length 2.54mm RJ45 使用环境参数 Environment Parameters 工作温度 Working temp. -20℃~+70℃ 存储温度 Storage temp. -20℃~+80℃ 环境湿度 Environment humidity 10%~85%RH RF Exposure Information This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.
六、 接口定义 Interface definition 连接器 Connector 引脚 Pin 线标定义 Definition 功能说明 Function description CON2 A2502WV04 4 VCC 电源输入正 压接端子 使用线径 Crimping terminal A2502-TP Wire diameter 22AWG RJ45 直连网线 Positive power input 3 RXD RS232 Data receiving terminal 2 TXD RS232 数据发送端 Data sending terminal 1 GND 电源输入负 Negative power input CON1 RJ45 接口 1 TXD RS232 Data receiving terminal 2 RXD RS232 数据接收端 Data sending terminal 3 GND 电源输入负 Negative power input 4 VCC 电源输入正 (带屏蔽) Directly connected
八、 FCC 警示语 FCC warnings 请注意,未经合规方明确批准的更改或修改可能会使用户操作设备的权限失效。 该设备符合FCC规则第15部分。操作需满足以下两个条件: (1)本装置不会造成有害干扰 (2)设备必须接受接收到的任何干扰,包括可能导致不希望的操作的干扰。 本设备符合FCC为不受控环境规定的辐射暴露限值。本设备安装和操作时,散热器与身体之 间的距离至少为20cm。 Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.