User Manual V0.4 DVR DSB FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment, ’ NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
; > User Manual V0.4 DVR DS800 DS800 Manual Version : 0.1 Making Date : July, 11, 2003 1. Install & Run 1.1. Descriptions A. Front Panel DIGIT WED RECORDING DSBG4 mw an mcr won Ba | | mou gw we EEE BSP3°2 Soar (BE PRAT Channel selection LED Function selection Direction/Replay button button button Remote controller receiver (1) Remote Controller Receiver {2) Channel Selection Button To select video input channel in monitoring and playback mode {3) LED PWR: To show power supplying status.
User Manual V0.
User Manual V0.4 DVR DS800 1.2. Connect Device A. Connect Video B. Connect Monitor C. Connect Ethernet D. Connect Audio E. Connect Power & Run 2. Monitor It is to monitor real time image. Ch. 1~8 are for analogue image input via BNC cable, and Ch. 5~18 are for digital image input of network camera via network, A. View basic screen (1) Supply power. (2) Power LED is on, and DVR starts booting. {3) After booting, basic screen {quad-split) shows.
3 User Manual V0.4 DVR DS200 button. (2) Press the [SEQ button from current multi screen. (3) Show [SEQ] mode in the right of screen and sequential images as much as the configured ‘Auto SW Interval’ value, (4) If connected channels are smaller than number of current split screen, SEQ function will not run, (5) Set ‘Auto SW Interval’ value in menu. Default value is 3 seconds. (6) To shut down [SEQ] function, press the [SEQ] button. E.
User Manual V0.4 DVR DS800 *TILT/FOCUS’ and [LEFT/RIGHT] arrow key for ‘PAN/ZOOM". (9) When selecting ‘Preset’, a dialogue for selecting stored preset shows. (10) When selecting ‘Preset Save’, a dialogue for storing current point as preset shows. H. View network camera's image (1) Channels 5 to 16 are for input of network cameras (Web Eye Series, I-Rec Series). (2) DVR should be connected to Ethernet and the related channel be set in MENU. 3.
User Manual V0.4 DVR DS800 increases gradually (x1, x2, x4, x8, x16) (5) € 4 (FAST REWIND) : Whenever pressing the button, reverse replaying speed increases gradually (x1, x2, x4, x8, x16) (6) STEP FORWARD : When pressing Replay] or FAST FORWARD] button from pause status, image is replayed frame by frame. (7) STEP REWIND : When pressing [ 4 «, FAST REWIND] button from pause status, image is replayed frame by frame. 4. Search It is to search any image in playback mode.
User Manual V0.4 DVR DS800 Setting Menu Main Menu Quick Setup ree Normal Rec, Alarm Rec. Relay ni Value | ve Setting Addends: N Sub Menu(2) Seb Menu{1) china #1 (Ana icy Ides Soil configuration meat, Irons Enter’ ta configure ein eA 5 och eA tats Bar B. Dialogue for entering word (1) When setting value is a word, the related dialogue box is indicated. (2) To set a word, use direction arrow keys and number keys “0” to "9". (3) The matching point between horizontal and vertical bar is selecting value.
User Manual V0.4 DVR DS8OO Dialogue for entering w C. Set camera 1. Press thw {Mani} button . 12. Select “Camera” main money and move 10 sub menu with pressing [Enter] button. 3. Cam#2~6 is same with Camilla T 1 | {eases | [oases | [caner | [comes 'WEB GATE INC.
User Manual V0.4 ¢DVR DS800 D. Set monitor Configuration Nn] E. Set recording schedule Configuration {5} Recording Schedule 1. Press the (Menu} button ~~ 2. Select “Recording Schedule” main menu and move 10 sub menu with pressing [Enter] button. 3. Cam#2~B is same with Cam#] i 4. Frame Rate and Res. Quality can be configured. when ‘Schedule Confirm” Ts set as “Custom”, in the other case. it Is "Read Onion, 5.
User Manual V0.4 «DVR DS800 F. Set alarm Configuration (6) Alarm i 7. Press Tha [Menu] Duff on 2. Select “Alma” mai ions and nova to Sub menu With pressing [Enter] bunion. 3. Sensor 14 can be doubles setting as sin condition 4, 5. Output is to designate relay in Case of slam tigers status, also can be double setting Frame fate end Res. Quality can ba configured, when "Alarm Recording” Is se! 45 “Gusto. In fie other case, if is "Read Only".
User Manual V0.4 Configuration (7) ~ System (2) i 3 ‘the Thieu] union 2. Select “Alma” main mine and move 10 Sub menu with pressing [Enter] button, 3. Sensor 1~4 can be double setting ss alarm condition 4. Output is to designate relay in case of lama jiggered status. it sso can 8. dale can be , when ‘Alas . Frame ang Fes. DVR SRO ‘WEB GATE INC.