Users Manual Part 2

ManualsBrandsWeber-Stephen Products ManualsElectronicsWi-Fi and BLE Transmitter

GRILL OPERATION

Changing Pellets/Purging Hopper

There may be times when you want to change the WEBER SMOKEFIRE ALL

NATURAL HARDWOOD PELLET ﬂavor for your next grilling session, or purge

the hopper for a thorough cleaning or maintenance.

1. From the rear of your SMOKEFIRE grill, set a large container underneath

the middle of the hopper (A).

2. Pull the hopper slide door located on the rear of the hopper to release

the pellets into the container below (B).

WARNING: Before ﬁlling your hopper with WEBER SMOKEFIRE ALL NATURAL

HARDWOOD PELLETS, visually inspect the hopper ﬁnger safety guard to ensure

it is in place and not damaged (C). If damaged, immediately contact the Customer

Service Representative in your area using the contact information on our website

for a replacement.

CAUTION: Always remember to ﬁll the hopper with WEBER SMOKEFIRE ALL

NATURAL HARDWOOD PELLETS before starting your SMOKEFIRE grill.

Grilling Methods

Your WEBER SMOKEFIRE is capable of many dierent cooking methods

such as grilling, searing, smoking, baking, braising, and roasting. Part of the

excitement of pellet grilling is that you get to enjoy all of your favorite recipes

infused with real hardwood ﬂavor. This element of ﬂavor can elevate your

average meal and make it something extraordinary.

NOTE: When grilling or smoking over a longer period of time, WEBER encourages

the use of a water pan inside the cookbox.

Explore Your Settings

There are many more features to be explored on the controller and the WEBER

CONNECT app. From programmable timers to cook programs, there are more

reasons to love your WEBER SMOKEFIRE grill. Explore and experiment with all

of the possibilities.

Summary of content (12 pages)

PAGE 1
GRILL OPERATION Changing Pellets/Purging Hopper There may be times when you want to change the WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLET flavor for your next grilling session, or purge the hopper for a thorough cleaning or maintenance. A 1. From the rear of your SMOKEFIRE grill, set a large container underneath the middle of the hopper (A). 2. Pull the hopper slide door located on the rear of the hopper to release the pellets into the container below (B).
PAGE 2
CONTROLLER SETTINGS NOTE: Download the WEBER CONNECT app to get the latest grill software and controller features. Dashboard 1 2 3 4 The dashboard shows all of the current grill info on the controller display. Here you will find your current and target grill temperature, device connectivity status, and separate tiles that can be setup to display guided cook programs, timers and food temperature probe information.
PAGE 3
CONTROLLER SETTINGS Cook Programs If selecting a guided cook program, push the button. Turn and press the dial to select the type of food that you will be cooking. Recently used cook programs will be saved within your controller for quick access to frequently cooked foods. After selecting your cook program, you can adjust the desired food settings to your personal preference.
PAGE 4
TROUBLESHOOTING NOTE: Download the WEBER CONNECT app to get the latest grill software and controller features. The controller uses advanced technology capable of troubleshooting your SMOKEFIRE grill. If a problem is detected with your grill, your controller will display and send an error code to notify you of the error before automatically beginning the necessary procedure.
PAGE 5
TROUBLESHOOTING Error Code Cause Solution 1. The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. E4 Communication Failure CAUTION: Do not unplug the grill or power it off during the shutdown procedure. 2. Once the shutdown procedure is complete, power off the grill and unplug from power source. 3.
PAGE 6
TROUBLESHOOTING Error Code Cause Solution The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled. E7 Motor Failure CAUTION: Do not unplug the grill or power it off during the shutdown procedure. See the following instructions on how to check the motor’s electrical connection.
PAGE 7
TROUBLESHOOTING E1 Auger Jam C Clearing an Auger Jam To clear the E1 error code from the controller, please follow these steps: 1. When the grill has completed the shutdown procedure and completely cooled, power off the grill and unplug from power source. 2. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. (A). 3. Using a Phillips screwdriver, remove the pellet slide from the fire pot, and shut the grill lid (B). 4.
PAGE 8
TROUBLESHOOTING 8. Remove the auger/motor assembly by first removing the two screws from the bracket. Carefully slide and twist the auger/motor assembly out and away from the grill (G), (H). I NOTE: Visually note the orientation of the motor when attached to the auger tube. 9. Remove the auger and motor from the auger tube by first removing the four fastening screws, then pull and twist the auger and motor out from the auger tube (I). 10.
PAGE 9
TROUBLESHOOTING Continued... L 13. Reinstall the auger/motor assembly by slowly and carefully sliding it back into the grill and securing it with two screws (L), (M). NOTE: Use care to avoid tearing the auger tube gasket when reinstalling the auger/motor assembly. If damaged, replacement gaskets can be ordered by contacting a WEBER Customer Service representative in your area using the contact information on our website. 14. Connect the motor’s electrical connection.
PAGE 10
TROUBLESHOOTING 16. Push the hopper slide door closed (P). 17. Open the hopper lid and fill the hopper with your choice of WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (Q). P 18. Open the grill lid and install the pellet slide using a Phillips screwdriver (R). NOTE: Make sure the auger tube is inserted through the pellet slide opening before securing hardware. 19. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking grates inside the cookbox. (S). 20.
PAGE 11
TROUBLESHOOTING E2 Fan Error Checking Fan Electrical Connection A To clear the E2 error code from the controller, please follow these steps: 1. When the grill has completed the shutdown procedure and completely cooled, power off the grill and unplug from power source (A). 2. From the rear of your SMOKEFIRE grill, remove the rear access panel by removing four screws (B). 3. Check the electrical connection to the fan (C). Make sure the connector is securely joined to the fan’s connection point. 4.
PAGE 12
TROUBLESHOOTING E7 Motor Failure Checking Motor Electrical Connection A To clear the E7 error code from the controller, please follow these steps: 1. When the grill has completed the shutdown procedure and completely cooled, power off the grill and unplug from power source (A). 2. From the rear of your SMOKEFIRE grill, remove the rear access panel by removing four screws (B). 3. Check the electrical connection on the motor (C). Make sure the connector is securely joined to the motor. 4.